NEMIX RAM MD44800-4828K2 96GB (2x48GB) DDR5 5600 CL46 UDIMM memory upgrade
- 96GB (2 x 48GB)
- 288-Pin DDR5 UDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
NEMIX RAM
96 GB DDR5 kit with two 48 GB UDIMMs running at 5600 MT/s CL46 1.1 V for Supermicro X14SAE-F
Size 96GB 2X48GB
This 96GB kit contains two 48GB DDR5 5600 UDIMMs built to the precise rank, voltage, and timing the motherboard expects. It is designed for desktop users who need the full capacity recognised at rated speed without manual tuning.
The modules use Samsung, Micron, or Hynix components tested for stability at 1.1V and CL46. The 2Rx8 organisation and non-ECC unbuffered design match the board's memory-population rules, so the DIMMs seat correctly in the standard 288-pin slots.
The jump is worth it when your current memory limits multitasking or workload throughput and you want a verified fit for the Supermicro X14SAE-F. Buyers who need ECC registered modules or SODIMM form factors cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The kit runs at DDR5 5600 MT/s with a PC5-44800 peak transfer rate, so the memory controller sees the rated throughput without manual tuning.
The modules use the standard 288-pin DDR5 UDIMM form factor and require unbuffered non-ECC DIMM slots; they will not fit ECC RDIMM or SODIMM sockets.
Install one module per channel following the board's DIMM population order in the manual; the step most often missed is placing the sticks in the correct slot pair for dual-channel operation.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?