NEMIX RAM MD44800-4828K2 96GB (2x48GB) DDR5 5600 CL46 UDIMM memory upgrade
- 96GB (2 x 48GB)
- 288-Pin DDR5 UDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
96 GB DDR5 kit with two 48 GB UDIMMs running at 5600 MT/s CL46 1.1 V for Supermicro X14SAE-F
Size 96GB 2X48GB
This 96GB kit contains two 48GB DDR5 5600 UDIMMs built to the precise rank, voltage, and timing the motherboard expects. It is designed for desktop users who need the full capacity recognised at rated speed without manual tuning.
The modules use Samsung, Micron, or Hynix components tested for stability at 1.1V and CL46. The 2Rx8 organisation and non-ECC unbuffered design match the board's memory-population rules, so the DIMMs seat correctly in the standard 288-pin slots.
The jump is worth it when your current memory limits multitasking or workload throughput and you want a verified fit for the Supermicro X14SAE-F. Buyers who need ECC registered modules or SODIMM form factors cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit runs at DDR5 5600 MT/s with a PC5-44800 peak transfer rate, so the memory controller sees the rated throughput without manual tuning.
The modules use the standard 288-pin DDR5 UDIMM form factor and require unbuffered non-ECC DIMM slots; they will not fit ECC RDIMM or SODIMM sockets.
Install one module per channel following the board's DIMM population order in the manual; the step most often missed is placing the sticks in the correct slot pair for dual-channel operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?