Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black 92mm square CPU cooler with Maglev fan

OEM Industries

OEM Industries KDE1209PTV1 92mm Maglev CPU cooler

SKU CH-RZ6H-JVBK1

A 92 mm maglev fan with a 12 V, 1.9 W three-wire design for CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeMaglev
  • LEDNo
  • 92 mm fan fits compact CPU cooler builds
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.9 W power draw keeps energy use low
  • Three-wire connector enables speed monitoring by the motherboard
  • Black square frame matches stealth-style system aesthetics

92 mm Maglev CPU Cooler

The OEM Industries KDE1209PTV1 is a square 92 mm fan designed for direct CPU mounting. It targets builders who need a low-profile air cooler with a three-wire connection for speed reporting. The maglev bearing reduces friction for consistent rotation. This unit suits compact chassis where tower coolers cannot fit.

Square Frame with Three-Wire Power

The black square frame matches the 9225 footprint and draws 1.9 W at 12 V. Three wires provide power, ground and a tachometer signal so the motherboard can monitor RPM. Maglev suspension removes physical contact between shaft and sleeve. No LED lighting keeps the appearance neutral for workstation builds.

Low Power Draw and Quiet Operation

At 1.9 W the fan adds minimal load to a 12 V rail and generates little waste heat. Maglev bearing noise stays low during typical desktop workloads. The three-wire interface allows the board to scale speed with temperature. Buyers who need higher static pressure or larger airflow should consider alternative coolers.

Erősségek

  • 92 mm fan fits compact CPU cooler builds
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.9 W power draw keeps energy use low
  • Three-wire connector enables speed monitoring by the motherboard
  • Black square frame matches stealth-style system aesthetics

Műszaki adatok

ModelKDE1209PTV1
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeMaglev
LEDNo

Kérdések a termékről

What voltage and power does the 3-wire connector on the KDE1209PTV1 draw?

The fan runs at 12 V and consumes 1.9 W through its three-wire power connector.

What are the exact mounting dimensions for the square cooler frame?

The cooler uses a 92 mm by 92 mm square footprint with a 25 mm thickness for standard 92 mm fan mounts.

How is the Maglev bearing fan installed and which wire is often missed?

Mount the 92 mm frame with four screws, then connect the three-wire plug — the third wire is the tachometer signal that must be seated for speed monitoring.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.