Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black 92mm square CPU cooler with Maglev fan

OEM Industries

OEM Industries KDE1209PTV1 92mm Maglev CPU cooler

SKU CH-RZ6H-JVBK1

A 92 mm maglev fan with a 12 V, 1.9 W three-wire design for CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeMaglev
  • LEDNo
  • 92 mm fan fits compact CPU cooler builds
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.9 W power draw keeps energy use low
  • Three-wire connector enables speed monitoring by the motherboard
  • Black square frame matches stealth-style system aesthetics

92 mm Maglev CPU Cooler

The OEM Industries KDE1209PTV1 is a square 92 mm fan designed for direct CPU mounting. It targets builders who need a low-profile air cooler with a three-wire connection for speed reporting. The maglev bearing reduces friction for consistent rotation. This unit suits compact chassis where tower coolers cannot fit.

Square Frame with Three-Wire Power

The black square frame matches the 9225 footprint and draws 1.9 W at 12 V. Three wires provide power, ground and a tachometer signal so the motherboard can monitor RPM. Maglev suspension removes physical contact between shaft and sleeve. No LED lighting keeps the appearance neutral for workstation builds.

Low Power Draw and Quiet Operation

At 1.9 W the fan adds minimal load to a 12 V rail and generates little waste heat. Maglev bearing noise stays low during typical desktop workloads. The three-wire interface allows the board to scale speed with temperature. Buyers who need higher static pressure or larger airflow should consider alternative coolers.

Istaknuto

  • 92 mm fan fits compact CPU cooler builds
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.9 W power draw keeps energy use low
  • Three-wire connector enables speed monitoring by the motherboard
  • Black square frame matches stealth-style system aesthetics

Specifikacije

ModelKDE1209PTV1
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeMaglev
LEDNo

Pitanja o ovom artiklu

What voltage and power does the 3-wire connector on the KDE1209PTV1 draw?

The fan runs at 12 V and consumes 1.9 W through its three-wire power connector.

What are the exact mounting dimensions for the square cooler frame?

The cooler uses a 92 mm by 92 mm square footprint with a 25 mm thickness for standard 92 mm fan mounts.

How is the Maglev bearing fan installed and which wire is often missed?

Mount the 92 mm frame with four screws, then connect the three-wire plug — the third wire is the tachometer signal that must be seated for speed monitoring.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.