Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black square blower fan 97 by 97 by 33 mm no LED

OEM Industries

OEM Industries NIDEC 9733 D10F-24PH 97*97*33mm Blower Fan

SKU CH-2QAK-39B3Q

A 97 mm blower fan with dual-ball bearings runs at 5000–5499 RPM on 24 V power

  • ColorBlack
  • TypeFan only
  • Fan Size97*97*33mm
  • Bearing Type2 Ball
  • RPM5000-5499 RPM
  • Power Connector3 Pin
  • Blower design directs airflow across heatsinks efficiently
  • Nidec 9733 motor ensures reliable long-term operation
  • Dual ball bearings reduce friction for extended lifespan
  • 24 V 0.33 A rating matches industrial power requirements
  • 5000–5499 RPM delivers strong static pressure

Blower Fan for Targeted Cooling

The NIDEC 9733 D10F-24PH is a 97 by 97 by 33 millimetre blower fan designed to direct airflow through a confined channel. It suits builders who need focused exhaust for small-form-factor systems or component-specific cooling where a traditional axial fan cannot reach.

24 Volt Operation and Ball Bearing

Running on 24 volts at 0.33 amps, the fan spins between 5000 and 5499 RPM using a two-ball bearing for durability. The three-pin power connector provides tachometer feedback so the system can monitor speed, though voltage control is required for adjustment.

Compact Black Housing with Four-Pin Interface

The black frame measures 97 millimetres square and 33 millimetres thick, fitting tight brackets without protruding. A four-pin interface is present alongside the three-pin power lead, but PWM control is not confirmed so buyers who need automatic speed curves should verify compatibility before purchase.

Erősségek

  • Blower design directs airflow across heatsinks efficiently
  • Nidec 9733 motor ensures reliable long-term operation
  • Dual ball bearings reduce friction for extended lifespan
  • 24 V 0.33 A rating matches industrial power requirements
  • 5000–5499 RPM delivers strong static pressure

Műszaki adatok

ModelD10F-24PH
ColorBlack
TypeFan only
Fan Size97*97*33mm
Bearing Type2 Ball
RPM5000-5499 RPM
Power Connector3 Pin
LEDNo

Kérdések a termékről

How do I connect the 3-pin power connector to a 4-pin header and which wire do I leave unused?

Align the three pins with the matching three holes on the 4-pin header; the fourth pin is for PWM control and remains empty on this fan.

When will the 2-ball bearing need replacement under continuous 5000-5499 RPM operation?

Expect several years of 24/7 running before bearing noise or vibration signals the end of service life.

At what point does the 24 V 0.33 A power limit throttle the blower during sustained load?

The fan draws a fixed 0.33 A at 24 V, so output stays constant until voltage drops or the bearing degrades.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.