Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black ABS 2.5 to 3.5 drive adapter with silver 5.25 trayless hot-swap bracket

Orico

Orico 2.5 to 3.5 SATA Adapter + 5.25 Trayless Hot-Swap Bracket (1125SS + 1106SS)

SKU CH-9T0H-2PER4 MPN 2.5

A 2.5-inch SATA drive adapter and trayless 5.25-inch hot-swap bracket for desktop bays

  • ColorBlack

Model 2.5 to 3.5 Drive Adapter Combo

  • 5.25 Trayless
  • 2.5 SSD SATA to 3.5 HDD Adapter
  • 2.5 to 3.5 Drive Adapter Combo
  • 2.5-inch HDD/SSD to 3.5-inch(D2S-6G)

Az áthúzott konfigurációk léteznek, de nem érhetők el itt.

Option 1 Pack

  • 1 Pack
  • 2 Packs
  • 5 Packs

Az áthúzott konfigurációk léteznek, de nem érhetők el itt.

  • Converts 2.5-inch SATA drives to 3.5-inch form factor using 1125SS adapter
  • Tool-free 3.5-inch to 5.25-inch hot-swap bracket 1106SS enables quick drive changes
  • SATA 3.0 interface delivers up to 6Gbps transfer speeds for fast data access
  • Open ABS tray design with side slots provides full airflow to keep drives cool
  • Supports 7mm, 9.5mm and 12.5mm 2.5-inch SATA HDDs and SSDs for wide compatibility

Kit Contents

This Orico kit combines a 2.5 to 3.5 inch drive adapter and a 5.25 inch trayless hot-swap bracket. It lets you mount a 2.5 inch SATA SSD or hard drive into a standard 3.5 inch bay and then install that assembly into a 5.25 inch front-access slot. The bundle suits builders adding laptop-class storage to a desktop chassis without extra cables or tools.

Who It Suits

The kit fits users who have a spare 5.25 inch bay and want hot-swap access to a 2.5 inch SATA drive up to 12.5 mm thick. It works with Windows, Mac OS and Linux and needs no driver installation. Builders without a 5.25 inch bay, or those needing to install drives thicker than 12.5 mm, cannot use this bracket. The adapter also does not accept drives with non-SATA interfaces.

Deciding Specification

The adapter uses a native SATA III interface rated at 6 Gbps and is backward compatible with SATA I and II. This single connection handles both power and data, so the drive communicates at up to 6 Gbps without separate cables. If your drive or host controller is limited to an earlier SATA revision, the link will negotiate down automatically.

Erősségek

  • Converts 2.5-inch SATA drives to 3.5-inch form factor using 1125SS adapter
  • Tool-free 3.5-inch to 5.25-inch hot-swap bracket 1106SS enables quick drive changes
  • SATA 3.0 interface delivers up to 6Gbps transfer speeds for fast data access
  • Open ABS tray design with side slots provides full airflow to keep drives cool
  • Supports 7mm, 9.5mm and 12.5mm 2.5-inch SATA HDDs and SSDs for wide compatibility

Műszaki adatok

BrandORICO
ModelORICO 1125SS + 1106SS
ColorBlack

Kérdések a termékről

Which drive thicknesses does the 1125SS adapter accept for my 2.5-inch SATA SSD?

The 1125SS adapter fits 7 mm, 9.5 mm and 12.5 mm 2.5-inch SATA drives.

Will the 1106SS bracket work in a legacy 5.25-inch bay that only has SATA I or II ports?

Yes, the 1106SS bracket uses SATA 3.0 and is backward compatible with SATA I and II controllers.

How do I confirm the 1106SS hot-swap bracket is active after installing a drive?

The bracket has an ON/OFF switch and an LED indicator that lights when the drive is powered and recognized.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.