Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black ABS 2.5 to 3.5 drive adapter with silver 5.25 trayless hot-swap bracket

Orico

Orico 2.5 to 3.5 SATA Adapter + 5.25 Trayless Hot-Swap Bracket (1125SS + 1106SS)

SKU CH-9T0H-2PER4 MPN 2.5

A 2.5-inch SATA drive adapter and trayless 5.25-inch hot-swap bracket for desktop bays

  • ColorBlack

Model 2.5 to 3.5 Drive Adapter Combo

  • 5.25 Trayless
  • 2.5 SSD SATA to 3.5 HDD Adapter
  • 2.5 to 3.5 Drive Adapter Combo
  • 2.5-inch HDD/SSD to 3.5-inch(D2S-6G)

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option 1 Pack

  • 1 Pack
  • 2 Packs
  • 5 Packs

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Converts 2.5-inch SATA drives to 3.5-inch form factor using 1125SS adapter
  • Tool-free 3.5-inch to 5.25-inch hot-swap bracket 1106SS enables quick drive changes
  • SATA 3.0 interface delivers up to 6Gbps transfer speeds for fast data access
  • Open ABS tray design with side slots provides full airflow to keep drives cool
  • Supports 7mm, 9.5mm and 12.5mm 2.5-inch SATA HDDs and SSDs for wide compatibility

Kit Contents

This Orico kit combines a 2.5 to 3.5 inch drive adapter and a 5.25 inch trayless hot-swap bracket. It lets you mount a 2.5 inch SATA SSD or hard drive into a standard 3.5 inch bay and then install that assembly into a 5.25 inch front-access slot. The bundle suits builders adding laptop-class storage to a desktop chassis without extra cables or tools.

Who It Suits

The kit fits users who have a spare 5.25 inch bay and want hot-swap access to a 2.5 inch SATA drive up to 12.5 mm thick. It works with Windows, Mac OS and Linux and needs no driver installation. Builders without a 5.25 inch bay, or those needing to install drives thicker than 12.5 mm, cannot use this bracket. The adapter also does not accept drives with non-SATA interfaces.

Deciding Specification

The adapter uses a native SATA III interface rated at 6 Gbps and is backward compatible with SATA I and II. This single connection handles both power and data, so the drive communicates at up to 6 Gbps without separate cables. If your drive or host controller is limited to an earlier SATA revision, the link will negotiate down automatically.

Kohokohdat

  • Converts 2.5-inch SATA drives to 3.5-inch form factor using 1125SS adapter
  • Tool-free 3.5-inch to 5.25-inch hot-swap bracket 1106SS enables quick drive changes
  • SATA 3.0 interface delivers up to 6Gbps transfer speeds for fast data access
  • Open ABS tray design with side slots provides full airflow to keep drives cool
  • Supports 7mm, 9.5mm and 12.5mm 2.5-inch SATA HDDs and SSDs for wide compatibility

Tekniset tiedot

BrandORICO
ModelORICO 1125SS + 1106SS
ColorBlack

Kysymyksiä tästä tuotteesta

Which drive thicknesses does the 1125SS adapter accept for my 2.5-inch SATA SSD?

The 1125SS adapter fits 7 mm, 9.5 mm and 12.5 mm 2.5-inch SATA drives.

Will the 1106SS bracket work in a legacy 5.25-inch bay that only has SATA I or II ports?

Yes, the 1106SS bracket uses SATA 3.0 and is backward compatible with SATA I and II controllers.

How do I confirm the 1106SS hot-swap bracket is active after installing a drive?

The bracket has an ON/OFF switch and an LED indicator that lights when the drive is powered and recognized.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.