NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
OWC
128GB DDR4 3200 ECC load-reduced DIMM for servers and workstations, CL22 latency at 1.2V with 4Rx4 rank and 288-pin fit
This 128GB DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC Load Reduced DIMM is built for servers, workstations and NAS systems that require registered ECC memory. It delivers 128GB per module at PC4-25600 speed with JEDEC-standard timings and voltage. The module is designed as a direct replacement for Cisco UCS part numbers UCSML128G4RW and UCSXML128G4RW.
The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4 platforms, allowing a straight swap without BIOS changes. The upgrade is worth it when your workload needs the higher 3200MHz data rate or the full 128GB density per slot to reduce the total module count. It will not work in systems that only accept unbuffered or standard registered ECC DIMMs.
Installation requires a motherboard with 288-pin DDR4 slots that support Load Reduced ECC memory and 4Rx4 organisation. The module has no heat spreader, so airflow in the chassis must be sufficient for bare DRAM. It cannot be mixed with unbuffered or registered ECC modules, freeing you from matching dissimilar memory types in the same channel.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
Yes, the 288-pin DDR4 LRDIMM form factor matches standard server DIMM slots; verify your platform accepts load-reduced memory before installing.
Align the notch with the slot key, press firmly until both retention clips click, and confirm the module sits evenly; the step often missed is not pressing both ends simultaneously.
No firmware updates are needed for the memory itself; the module is designed for the server's lifespan, though system BIOS updates may improve compatibility with 3200MHz operation.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?