NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
128GB DDR4 3200 ECC load-reduced DIMM for servers and workstations, CL22 latency at 1.2V with 4Rx4 rank and 288-pin fit
This 128GB DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC Load Reduced DIMM is built for servers, workstations and NAS systems that require registered ECC memory. It delivers 128GB per module at PC4-25600 speed with JEDEC-standard timings and voltage. The module is designed as a direct replacement for Cisco UCS part numbers UCSML128G4RW and UCSXML128G4RW.
The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4 platforms, allowing a straight swap without BIOS changes. The upgrade is worth it when your workload needs the higher 3200MHz data rate or the full 128GB density per slot to reduce the total module count. It will not work in systems that only accept unbuffered or standard registered ECC DIMMs.
Installation requires a motherboard with 288-pin DDR4 slots that support Load Reduced ECC memory and 4Rx4 organisation. The module has no heat spreader, so airflow in the chassis must be sufficient for bare DRAM. It cannot be mixed with unbuffered or registered ECC modules, freeing you from matching dissimilar memory types in the same channel.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
Yes, the 288-pin DDR4 LRDIMM form factor matches standard server DIMM slots; verify your platform accepts load-reduced memory before installing.
Align the notch with the slot key, press firmly until both retention clips click, and confirm the module sits evenly; the step often missed is not pressing both ends simultaneously.
No firmware updates are needed for the memory itself; the module is designed for the server's lifespan, though system BIOS updates may improve compatibility with 3200MHz operation.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?