Rosewill RS-NS-CL Dual Bay M.2 & 2.5/3.5" SATA Enclosure USB 3.1 Gen 2 Type-C 10Gbps Offline Clone
- M.2, 2.5", 3.5"
- Dual Bay Duplicator…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Rosewill
Clones or erases two M.2 NVMe drives offline, then connects via 20 Gbps USB-C for host access
External Interface USB 3.2 Gen 2 Type-C
Model NVMe Clone + Eraser
The Rosewill RS-N2-CLE is a tool-free, dual-bay M.2 NVMe duplicator that performs offline clones and secure erasure without a host computer. It targets IT technicians and data managers who need to replicate or sanitise M-key PCIe drives up to 4 TB per bay. A 5 V / 3 A AC adapter powers the unit, which supports Windows, Mac OS, Linux, Android and iOS when connected via USB.
This unit removes the need to tie up a workstation for sector-by-sector copies or multi-pass wipes, cutting the time spent on repetitive deployments or decommissions. The jump is worth it when you regularly handle batches of M.2 NVMe drives and want standalone operation with four selectable erasure modes for compliance.
The external connection caps sustained throughput at 20 Gbps, so attached hosts cannot exceed that ceiling even if the installed SSDs are faster. Offline cloning and erasure run at the drives’ native PCIe speeds, but any file-level access over USB stays within the 20 Gbps envelope.
| Brand | Rosewill |
|---|---|
| Model | RS-N2-CLE |
| Size | 2.5" / 3.5" HDD / SSD Cloner/ Copier |
| Type | Dual Bay M.2 NVMe Duplicator |
| AC Adapter | Yes, 5V/3A |
| Material | ABS |
| Internal Interface | M.2 NVME M-Key |
| External Interface | USB 3.2 Gen 2 Type-C |
| HDD Count Supported | Dual Bay M.2 NVMe |
| Number of Bay | 2 Bay |
| Maximum Capacity (per Bay) | Up to 4TB |
| Operating Systems Supported | Windows / Mac OS / Linux / Android / IOS |
| Dimensions | 3.1" x 3.01" x 0.71" |
| Weight | 0.34 lb. |
| Szállítási súly | 0.36 kg |
| Csomagméret | 152 × 124 × 74 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Each bay takes an M-key NVMe module up to 4 TB; the duplicator has no screw holes so the drive simply slides in and locks with the built-in latch.
Insert the source drive in bay one and the target in bay two, power the unit with the 5 V 3 A adapter, then hold the clone button until the LEDs flash — skipping that long press is the common error.
Replace it if the duplicator fails to power on, the clone process aborts mid-way, or the adapter becomes unusually hot during operation.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?