Rosewill RS-NS-CL Dual Bay M.2 & 2.5/3.5" SATA Enclosure USB 3.1 Gen 2 Type-C 10Gbps Offline Clone
- M.2, 2.5", 3.5"
- Dual Bay Duplicator…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Rosewill
Three-bay docking station clones two M.2 NVMe and one 2.5″/3.5″ SATA drive offline at 10Gbps via USB 3.2 Gen 2 Type-C
External Interface USB 3.1 Gen 2 Type-C
Model SSD / HDD / NVMe Cloner Stand
The Rosewill RS-N2S-CL accepts two M.2 NVMe M-Key drives and one 2.5-inch or 3.5-inch SATA drive simultaneously. It functions as a standalone offline duplicator or as a USB 3.2 Gen 2 Type-C docking station for Windows, Mac OS, Linux, Android and iOS. Each bay supports up to 4TB of capacity.
Drives slide into the ABS chassis without screws or trays, and the 12V/3A power adapter supplies all three bays. Offline cloning starts with a button press, removing the need for a host computer during duplication. The compact 3.1 by 3.01 by 0.71 inch form factor weighs 0.34 lb, so alignment of the M-Key notch is the only step that can go wrong.
The external Type-C link caps sustained throughput at 10Gbps, so the fastest NVMe drives will not reach their internal PCIe speeds when docked. SATA drives are limited by their own 6Gbps ceiling, and the single controller shares total bandwidth across all active bays. Offline cloning speed depends on the slowest source or target drive installed.
| Brand | Rosewill |
|---|---|
| Model | RS-N2S-CL |
| Size | 2.5" / 3.5" HDD / SSD Cloner/ Copier |
| Type | Three Bay M.2 NVMe Duplicator |
| AC Adapter | Yes, 12V/3A |
| Material | ABS |
| Internal Interface | M.2 NVME M-Key & 2.5"/3.5" SATA |
| External Interface | USB 3.2 Gen 2 Type-C |
| HDD Count Supported | Dual M.2 NVMe & One 2.5"/3.5" |
| Number of Bay | 3 |
| Maximum Capacity (per Bay) | Up to 4TB |
| Operating Systems Supported | Windows / Mac OS / Linux / Android / IOS |
| Dimensions | 3.1" x 3.01" x 0.71" |
| Weight | 0.34 lb. |
| Szállítási súly | 0.36 kg |
| Csomagméret | 178 × 140 × 66 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The dock shows progress LEDs during the clone; when all lights stay solid the copy is complete and each target drive should mount with the same capacity as the source.
The package includes the three-bay dock, a 12V/3A AC adapter and a USB 3.2 Gen 2 Type-C cable; you provide up to two M.2 NVMe M-Key SSDs and one 2.5"/3.5" SATA drive.
The single 2.5"/3.5" bay accepts the 4 TB SATA drive, while either of the two M.2 slots takes the 2 TB NVMe M-Key SSD; each bay supports up to 4 TB.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?