NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
SAMSUNG
An 8 GB registered DDR4 ECC module running at 2133 MT/s with CL15 latency and 1.2 V operation
This 8GB DDR4 module is built for servers and workstations that require error-correcting registered memory. It operates at 2133 MT/s with a CAS latency of 15 at 1.20V. The single-rank x4 organisation uses a 288-pin form factor. Buyers needing non-ECC or unbuffered DIMMs for consumer platforms cannot use this module.
The registered buffer and on-die ECC are the decisive specifications for compatibility. The module presents a 1Rx4 configuration with an 8-bit parity signal for error correction. Registers retime clock, command and control signals to reduce electrical load on the memory controller. Systems that require unbuffered memory or a different rank structure will not accept this DIMM.
Under sustained load the module maintains its rated 2133 MT/s speed and CL15 timing at the standard 1.20V. The registered design helps signal integrity across fully populated channels during long compute runs. Thermal behaviour follows the DDR4 specification for registered DIMMs. No higher speeds or lower latencies are supported beyond the rated figures.
| Brand | SAMSUNG |
|---|---|
| Series | Server Memory |
| Model | SAMSUNG:M393A1G40DB0-CPB SAMSUNG:M393A1G40EB1-CPB CRUCIAL:CT8G4RFS4213 HYNIX:HMA41GR7MFR4N-TF KINGSTON:KVR21R15S4/8 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Compatible System | M393A1G40DB0-CPB |
| Features | Dual in line memory module with memory -Includes registers for optimizing clock, command, and control signals -Error correction is realized by adding 8-bit parity check signal -Supports X4 / X8 organizations / up to 2 levels per DIMM and 3dpc configuration -Application: Server |
The PC4-17000 rating means a peak transfer rate of 17 GB/s per module, so an 8 GB stick delivers that bandwidth when the memory controller runs at the rated 2133 MT/s.
The onboard register re-drives clock, command and control lines, reducing electrical load on the CPU memory controller and allowing larger total memory populations than unbuffered DIMMs.
At 30 mm tall, 133 mm long and 3 mm thick, the 288-pin RDIMM fits the standard DDR4 slot profile used in the validated Supermicro X10 boards listed.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?