SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SAMSUNG
An 8 GB registered DDR4 ECC module running at 2133 MT/s with CL15 latency and 1.2 V operation
This 8GB DDR4 module is built for servers and workstations that require error-correcting registered memory. It operates at 2133 MT/s with a CAS latency of 15 at 1.20V. The single-rank x4 organisation uses a 288-pin form factor. Buyers needing non-ECC or unbuffered DIMMs for consumer platforms cannot use this module.
The registered buffer and on-die ECC are the decisive specifications for compatibility. The module presents a 1Rx4 configuration with an 8-bit parity signal for error correction. Registers retime clock, command and control signals to reduce electrical load on the memory controller. Systems that require unbuffered memory or a different rank structure will not accept this DIMM.
Under sustained load the module maintains its rated 2133 MT/s speed and CL15 timing at the standard 1.20V. The registered design helps signal integrity across fully populated channels during long compute runs. Thermal behaviour follows the DDR4 specification for registered DIMMs. No higher speeds or lower latencies are supported beyond the rated figures.
| Brand | SAMSUNG |
|---|---|
| Series | Server Memory |
| Model | SAMSUNG:M393A1G40DB0-CPB SAMSUNG:M393A1G40EB1-CPB CRUCIAL:CT8G4RFS4213 HYNIX:HMA41GR7MFR4N-TF KINGSTON:KVR21R15S4/8 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Compatible System | M393A1G40DB0-CPB |
| Features | Dual in line memory module with memory -Includes registers for optimizing clock, command, and control signals -Error correction is realized by adding 8-bit parity check signal -Supports X4 / X8 organizations / up to 2 levels per DIMM and 3dpc configuration -Application: Server |
The PC4-17000 rating means a peak transfer rate of 17 GB/s per module, so an 8 GB stick delivers that bandwidth when the memory controller runs at the rated 2133 MT/s.
The onboard register re-drives clock, command and control lines, reducing electrical load on the CPU memory controller and allowing larger total memory populations than unbuffered DIMMs.
At 30 mm tall, 133 mm long and 3 mm thick, the 288-pin RDIMM fits the standard DDR4 slot profile used in the validated Supermicro X10 boards listed.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?