Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate BarraCuda 7200.11 ST3750330AS 750GB 7200 RPM 32MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-H3S1-TD1CE MPN ST3750330AS

A 750 GB 3.5" desktop drive spinning at 7200 RPM with 32 MB cache and a SATA 3.0Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity750GB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache32MB
  • 750 GB capacity stores large server datasets
  • 7200 RPM spindle speed reduces data access latency
  • 32 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface connects to standard desktop motherboards
  • 16 ms average latency supports responsive server workloads

Capacity and Interface

This Seagate BarraCuda 7200.11 desktop internal hard drive provides 750GB of storage on a SATA 3.0Gb/s interface. The 3.5 inch form factor fits standard drive bays and the bare drive packaging is intended for system integrators. It spins at 7200 RPM with a 32MB cache to handle everyday workloads.

Server Focus

The manufacturer highlights suitability for server deployments where sustained throughput matters. Buyers who need a faster interface than SATA 3.0Gb/s or a larger capacity than 750GB should consider other options. Those requiring a 2.5 inch form factor for compact chassis will also need a different drive.

Deciding Specification

The SATA 3.0Gb/s interface speed is the single specification that determines compatibility with your host controller. Verify that your motherboard or backplane supports this revision before purchase. The 4.16ms average latency and 7200 RPM spindle speed are fixed characteristics of this model.

Erősségek

  • 750 GB capacity stores large server datasets
  • 7200 RPM spindle speed reduces data access latency
  • 32 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface connects to standard desktop motherboards
  • 16 ms average latency supports responsive server workloads

Műszaki adatok

BrandSeagate
SeriesBarraCuda 7200.11
ModelST3750330AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity750GB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache32MB
Average Latency4.16ms
UsageIdeal for Servers
Form Factor3.5"
Szállítási súly0.65 kg
Csomagméret146 × 102 × 25 mm

Kérdések a termékről

Does this 3.5" drive need a 1.0 inch high bay?

Yes, it is a low-profile 3.5" drive with a 1.0 inch height, so it fits standard slim 3.5" bays.

Which cable and jumper settings are needed to install the SATA 3.0Gb/s interface?

Connect a standard SATA data cable and SATA power connector; no jumpers are required for SATA 3.0Gb/s operation.

When should the 32MB cache drive be replaced in a server workload?

Monitor SMART reallocated sector counts and replace the drive if pending or reallocated sectors increase steadily.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.