Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Silver 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate BarraCuda 7200.11 ST3750330AS 750GB 7200 RPM 32MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-H3S1-TD1CE MPN ST3750330AS

A 750 GB 3.5" desktop drive spinning at 7200 RPM with 32 MB cache and a SATA 3.0Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity750GB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache32MB
  • 750 GB capacity stores large server datasets
  • 7200 RPM spindle speed reduces data access latency
  • 32 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface connects to standard desktop motherboards
  • 16 ms average latency supports responsive server workloads

Capacity and Interface

This Seagate BarraCuda 7200.11 desktop internal hard drive provides 750GB of storage on a SATA 3.0Gb/s interface. The 3.5 inch form factor fits standard drive bays and the bare drive packaging is intended for system integrators. It spins at 7200 RPM with a 32MB cache to handle everyday workloads.

Server Focus

The manufacturer highlights suitability for server deployments where sustained throughput matters. Buyers who need a faster interface than SATA 3.0Gb/s or a larger capacity than 750GB should consider other options. Those requiring a 2.5 inch form factor for compact chassis will also need a different drive.

Deciding Specification

The SATA 3.0Gb/s interface speed is the single specification that determines compatibility with your host controller. Verify that your motherboard or backplane supports this revision before purchase. The 4.16ms average latency and 7200 RPM spindle speed are fixed characteristics of this model.

Öne çıkanlar

  • 750 GB capacity stores large server datasets
  • 7200 RPM spindle speed reduces data access latency
  • 32 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface connects to standard desktop motherboards
  • 16 ms average latency supports responsive server workloads

Teknik özellikler

BrandSeagate
SeriesBarraCuda 7200.11
ModelST3750330AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity750GB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache32MB
Average Latency4.16ms
UsageIdeal for Servers
Form Factor3.5"
Kargo ağırlığı0.65 kg
Koli boyutu146 × 102 × 25 mm

Bu ürünle ilgili sorular

Does this 3.5" drive need a 1.0 inch high bay?

Yes, it is a low-profile 3.5" drive with a 1.0 inch height, so it fits standard slim 3.5" bays.

Which cable and jumper settings are needed to install the SATA 3.0Gb/s interface?

Connect a standard SATA data cable and SATA power connector; no jumpers are required for SATA 3.0Gb/s operation.

When should the 32MB cache drive be replaced in a server workload?

Monitor SMART reallocated sector counts and replace the drive if pending or reallocated sectors increase steadily.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.