Seagate ST4000VN000 4TB 64MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Seagate
3 TB SATA 6.0 Gb/s 3.5" NAS hard drive with 64 MB cache, built for 1- to 8-bay systems running 24×7
The Seagate ST3000VN000 is a 3TB 3.5 inch internal hard drive designed for 1- to 8-bay NAS systems. It uses a SATA 6.0Gb/s interface and includes 64MB cache. The drive is built for continuous 24x7 operation in multi-user environments supporting 20 users or less. It suits home or small office NAS towers and desktop RAID arrays.
NASWorks technology provides customized error recovery controls to help prevent drives from being dropped during RAID rebuilds. Dual-plane balance improves vibration tolerance in multi-drive configurations. Advanced power management supports multiple profiles for low-power continuous operation. Quiet drive acoustics enhance the experience in living room or office settings.
Verify your NAS or server has an available 3.5 inch drive bay and a SATA data plus power connection. Confirm the system supports 3TB capacity and the 26.11mm drive height. Bare drive packaging means no mounting screws or cables are included. Ensure your RAID controller or NAS firmware is compatible with NAS-optimized error recovery and vibration settings.
| Brand | Seagate |
|---|---|
| Series | NAS HDD |
| Model | ST3000VN000 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 3TB |
| Cache | 64MB |
| Features | Best-Performing, Highest-Capacity Storage for 1- to 8-Bay NAS Systems - Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems. - NASWorks technology supports customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 8-bay solution with 20 users or less. - NAS error recovery controls optimize drive health by helping to ensure drives are not dropped from the NAS and sent into a RAID rebuild. - Improved vibration tolerance and emission in multi-drive systems with dual-plan |
| Usage | For NAS systems |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.99mm |
| Szállítási súly | 0.61 kg |
| Csomagméret | 146 × 102 × 25 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive is built and tested for 24x7 NAS applications in 1- to 8-bay systems with 20 users or less.
The 64MB cache and SATA 6.0Gb/s interface set the throughput ceiling during continuous operation.
Quiet drive operation is specified for living-room or office environments, and advanced power management supports multiple low-power profiles for 24x7 use.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?