Seagate ST3000VN000 3TB 64MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Seagate
A 4 TB 3.5-inch SATA drive with 64 MB cache and 5900 RPM, built for 1- to 8-bay NAS systems running 24/7
The Seagate NAS HDD ST4000VN000 is a 4TB 3.5-inch internal hard drive built for 1- to 8-bay NAS systems. It runs at 5900 RPM with a 64MB cache and a SATA 6.0Gb/s interface. The drive is designed for 24 x 7 operation in multi-bay enclosures.
The bare drive mounts in any standard 3.5-inch bay using four screws and connects with a SATA data and power cable. No special drivers are required; the drive appears in the NAS firmware after a reboot. The most common issue is forgetting to initialise the volume in the NAS operating system before use.
Verify that your NAS chassis has a free 3.5-inch bay and that the SATA backplane supports 6.0Gb/s speeds. Confirm the power supply can deliver enough current for an additional 3.5-inch mechanical drive. Ensure the NAS firmware is current so it recognises the full 4TB capacity.
| Brand | Seagate |
|---|---|
| Series | NAS HDD |
| Model | ST4000VN000 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| Cache | 64MB |
| Features | Best-Performing, Highest-Capacity Storage for 1- to 8-Bay NAS Systems - Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems. - NASWorks technology supports customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 8-bay solution with 20 users or less. - NAS error recovery controls optimize drive health by helping to ensure drives are not dropped from the NAS and sent into a RAID rebuild. - Improved vibration tolerance and emission in multi-drive systems with dual-plan |
| Usage | For NAS systems |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.99mm |
| Szállítási súly | 0.75 kg |
| Csomagméret | 146 × 102 × 25 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Check the NAS dashboard for drive detection, SMART status showing healthy, and the capacity reading 4TB with the 64MB cache recognised.
Only the 3.5-inch drive arrives; you need to supply SATA data and power cables plus any mounting screws or trays your NAS requires.
The ST4000VN000 is the 4TB model; pick it when you want 4TB per bay, or select a different capacity from the same series if your storage plan differs.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?