我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 3.5-inch bare SATA hard drive with exposed circuit board

Seagate

Seagate ST4000VN000 4TB 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-5JZA-DJQWQ MPN ST4000VN000

A 4 TB 3.5-inch SATA drive with 64 MB cache and 5900 RPM, built for 1- to 8-bay NAS systems running 24/7

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • Cache64MB
  • FeaturesBest-Performing, Highest-Capacity Storage for 1- to 8-Bay NA
  • UsageFor NAS systems

Options 4TB

  • Designed for 1-to-8-bay NAS systems
  • 24/7 operation tested for continuous reliability
  • 64 MB cache boosts multi-user throughput
  • 5900 RPM spindle balances speed and heat
  • SATA 6.0 Gb/s interface ensures broad compatibility

Seagate NAS HDD 4TB SATA 6.0Gb/s

The Seagate NAS HDD ST4000VN000 is a 4TB 3.5-inch internal hard drive built for 1- to 8-bay NAS systems. It runs at 5900 RPM with a 64MB cache and a SATA 6.0Gb/s interface. The drive is designed for 24 x 7 operation in multi-bay enclosures.

Installation and common issues

The bare drive mounts in any standard 3.5-inch bay using four screws and connects with a SATA data and power cable. No special drivers are required; the drive appears in the NAS firmware after a reboot. The most common issue is forgetting to initialise the volume in the NAS operating system before use.

Pre-order checks

Verify that your NAS chassis has a free 3.5-inch bay and that the SATA backplane supports 6.0Gb/s speeds. Confirm the power supply can deliver enough current for an additional 3.5-inch mechanical drive. Ensure the NAS firmware is current so it recognises the full 4TB capacity.

商品特色

  • Designed for 1-to-8-bay NAS systems
  • 24/7 operation tested for continuous reliability
  • 64 MB cache boosts multi-user throughput
  • 5900 RPM spindle balances speed and heat
  • SATA 6.0 Gb/s interface ensures broad compatibility

商品規格

BrandSeagate
SeriesNAS HDD
ModelST4000VN000
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
Cache64MB
FeaturesBest-Performing, Highest-Capacity Storage for 1- to 8-Bay NAS Systems
- Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems.
- NASWorks technology supports customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 8-bay solution with 20 users or less.
- NAS error recovery controls optimize drive health by helping to ensure drives are not dropped from the NAS and sent into a RAID rebuild.
- Improved vibration tolerance and emission in multi-drive systems with dual-plan
UsageFor NAS systems
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.60mm
Length (maximum)146.99mm
出貨重量0.75 kg
包裝尺寸146 × 102 × 25 mm

其他版本

同系列還有 2 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How can I verify the ST4000VN000 is running correctly after installing it in my NAS?

Check the NAS dashboard for drive detection, SMART status showing healthy, and the capacity reading 4TB with the 64MB cache recognised.

What ships with the bare-drive ST4000VN000 and what must I source separately?

Only the 3.5-inch drive arrives; you need to supply SATA data and power cables plus any mounting screws or trays your NAS requires.

Which capacity version of the Seagate NAS HDD series should I choose for a 4-bay enclosure?

The ST4000VN000 is the 4TB model; pick it when you want 4TB per bay, or select a different capacity from the same series if your storage plan differs.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。