저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 3.5-inch bare SATA hard drive with exposed circuit board

Seagate

Seagate ST4000VN000 4TB 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-5JZA-DJQWQ MPN ST4000VN000

A 4 TB 3.5-inch SATA drive with 64 MB cache and 5900 RPM, built for 1- to 8-bay NAS systems running 24/7

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • Cache64MB
  • FeaturesBest-Performing, Highest-Capacity Storage for 1- to 8-Bay NA
  • UsageFor NAS systems

Options 4TB

  • Designed for 1-to-8-bay NAS systems
  • 24/7 operation tested for continuous reliability
  • 64 MB cache boosts multi-user throughput
  • 5900 RPM spindle balances speed and heat
  • SATA 6.0 Gb/s interface ensures broad compatibility

Seagate NAS HDD 4TB SATA 6.0Gb/s

The Seagate NAS HDD ST4000VN000 is a 4TB 3.5-inch internal hard drive built for 1- to 8-bay NAS systems. It runs at 5900 RPM with a 64MB cache and a SATA 6.0Gb/s interface. The drive is designed for 24 x 7 operation in multi-bay enclosures.

Installation and common issues

The bare drive mounts in any standard 3.5-inch bay using four screws and connects with a SATA data and power cable. No special drivers are required; the drive appears in the NAS firmware after a reboot. The most common issue is forgetting to initialise the volume in the NAS operating system before use.

Pre-order checks

Verify that your NAS chassis has a free 3.5-inch bay and that the SATA backplane supports 6.0Gb/s speeds. Confirm the power supply can deliver enough current for an additional 3.5-inch mechanical drive. Ensure the NAS firmware is current so it recognises the full 4TB capacity.

주요 특징

  • Designed for 1-to-8-bay NAS systems
  • 24/7 operation tested for continuous reliability
  • 64 MB cache boosts multi-user throughput
  • 5900 RPM spindle balances speed and heat
  • SATA 6.0 Gb/s interface ensures broad compatibility

사양

BrandSeagate
SeriesNAS HDD
ModelST4000VN000
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
Cache64MB
FeaturesBest-Performing, Highest-Capacity Storage for 1- to 8-Bay NAS Systems
- Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems.
- NASWorks technology supports customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 8-bay solution with 20 users or less.
- NAS error recovery controls optimize drive health by helping to ensure drives are not dropped from the NAS and sent into a RAID rebuild.
- Improved vibration tolerance and emission in multi-drive systems with dual-plan
UsageFor NAS systems
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.60mm
Length (maximum)146.99mm
배송 무게0.75 kg
포장 크기146 × 102 × 25 mm

이 모델의 다른 버전

같은 라인업에서 2개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How can I verify the ST4000VN000 is running correctly after installing it in my NAS?

Check the NAS dashboard for drive detection, SMART status showing healthy, and the capacity reading 4TB with the 64MB cache recognised.

What ships with the bare-drive ST4000VN000 and what must I source separately?

Only the 3.5-inch drive arrives; you need to supply SATA data and power cables plus any mounting screws or trays your NAS requires.

Which capacity version of the Seagate NAS HDD series should I choose for a 4-bay enclosure?

The ST4000VN000 is the 4TB model; pick it when you want 4TB per bay, or select a different capacity from the same series if your storage plan differs.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.