Seagate
Seagate ST3000VN000 3TB 64MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
104,99 US$140,99 US$−26%
0.00130783BTC
Em stock
Seagate
Seagate ST4000VN000 4TB 64MB SATA 6.0Gb/s 3.5" internal hard drive
A 4 TB 3.5-inch SATA drive with 64 MB cache and 5900 RPM, built for 1- to 8-bay NAS systems running 24/7
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity4TB
- Cache64MB
- FeaturesBest-Performing, Highest-Capacity Storage for 1- to 8-Bay NA
- UsageFor NAS systems
- Designed for 1-to-8-bay NAS systems
- 24/7 operation tested for continuous reliability
- 64 MB cache boosts multi-user throughput
- 5900 RPM spindle balances speed and heat
- SATA 6.0 Gb/s interface ensures broad compatibility
Seagate NAS HDD 4TB SATA 6.0Gb/s
The Seagate NAS HDD ST4000VN000 is a 4TB 3.5-inch internal hard drive built for 1- to 8-bay NAS systems. It runs at 5900 RPM with a 64MB cache and a SATA 6.0Gb/s interface. The drive is designed for 24 x 7 operation in multi-bay enclosures.
Installation and common issues
The bare drive mounts in any standard 3.5-inch bay using four screws and connects with a SATA data and power cable. No special drivers are required; the drive appears in the NAS firmware after a reboot. The most common issue is forgetting to initialise the volume in the NAS operating system before use.
Pre-order checks
Verify that your NAS chassis has a free 3.5-inch bay and that the SATA backplane supports 6.0Gb/s speeds. Confirm the power supply can deliver enough current for an additional 3.5-inch mechanical drive. Ensure the NAS firmware is current so it recognises the full 4TB capacity.
Pontos fortes
- Designed for 1-to-8-bay NAS systems
- 24/7 operation tested for continuous reliability
- 64 MB cache boosts multi-user throughput
- 5900 RPM spindle balances speed and heat
- SATA 6.0 Gb/s interface ensures broad compatibility
Especificações
| Brand | Seagate |
|---|---|
| Series | NAS HDD |
| Model | ST4000VN000 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| Cache | 64MB |
| Features | Best-Performing, Highest-Capacity Storage for 1- to 8-Bay NAS Systems - Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems. - NASWorks technology supports customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 8-bay solution with 20 users or less. - NAS error recovery controls optimize drive health by helping to ensure drives are not dropped from the NAS and sent into a RAID rebuild. - Improved vibration tolerance and emission in multi-drive systems with dual-plan |
| Usage | For NAS systems |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.99mm |
| Peso de envio | 0.75 kg |
| Dimensões da embalagem | 146 × 102 × 25 mm |
Outras versões deste modelo
Mais 2 nesta gama
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
Seagate
Seagate NAS HDD ST6000VN0021 6TB 128MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
177,99 US$
0.00221717BTC
Em stockPerguntas sobre este artigo
How can I verify the ST4000VN000 is running correctly after installing it in my NAS?
Check the NAS dashboard for drive detection, SMART status showing healthy, and the capacity reading 4TB with the 64MB cache recognised.
What ships with the bare-drive ST4000VN000 and what must I source separately?
Only the 3.5-inch drive arrives; you need to supply SATA data and power cables plus any mounting screws or trays your NAS requires.
Which capacity version of the Seagate NAS HDD series should I choose for a 4-bay enclosure?
The ST4000VN000 is the 4TB model; pick it when you want 4TB per bay, or select a different capacity from the same series if your storage plan differs.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
