Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Silver 3.5 inch internal hard drive with 80-pin SCSI connector

Seagate

Seagate ST336752LC 36GB 15000 RPM 8MB SCSI 3.5" internal hard drive

SKU CH-P717-4MFRW MPN ST336752LC

36.7 GB enterprise SCSI drive spins at 15000 RPM with 8 MB cache and 3.6 ms seek time

  • InterfaceSCSI
  • Capacity36GB
  • RPM15000 RPM
  • Cache8MB
  • UsageFor Enterprise Storage
  • Form Factor3.5"
  • 15000 RPM spindle speed accelerates data access
  • 6 ms average seek time reduces latency
  • 8 MB cache buffers bursts for smoother throughput
  • Ultra160 SCSI interface delivers 160 MB/s bandwidth
  • 0 inch low-profile 3.5" form factor fits dense enterprise bays

Enterprise SCSI Drive for Legacy Servers

The Seagate ST336752LC is a 36GB 15000 RPM hard drive with an 8MB cache built for enterprise storage environments. Its SCSI interface targets administrators maintaining or expanding older server and workstation platforms that rely on this bus architecture. The 3.5 inch low-profile form factor measures 1.0 inch in height for dense rack deployments.

Hot-Pluggable 80-Pin Ultra160 Connectivity

An 80-pin Ultra160 SCSI connector supports hot-pluggable installation so drives can be swapped without powering down the host system. The 160 MB/s interface bandwidth matches the 15000 RPM spindle speed and 3.6 ms average seek time to sustain high transaction rates. This mechanical specification suits continuous-duty arrays where uptime and serviceability are primary design constraints.

Direct Replacement for 36GB 15K SCSI Volumes

This drive replaces a failed or degraded 36GB 15000 RPM SCSI unit in existing RAID sets or standalone bays without requiring firmware or cabling changes. The jump is worth it when a compatible spare is needed immediately to restore redundancy or capacity in a certified configuration. Buyers needing larger capacities, different interfaces or non-enterprise workloads should look elsewhere.

Erősségek

  • 15000 RPM spindle speed accelerates data access
  • 6 ms average seek time reduces latency
  • 8 MB cache buffers bursts for smoother throughput
  • Ultra160 SCSI interface delivers 160 MB/s bandwidth
  • 0 inch low-profile 3.5" form factor fits dense enterprise bays

Műszaki adatok

InterfaceSCSI
Capacity36GB
RPM15000 RPM
Cache8MB
UsageFor Enterprise Storage
Form Factor3.5"
Szállítási súly0.91 kg
Csomagméret152 × 102 × 51 mm

Kérdések a termékről

What throughput does the Ultra160 SCSI interface cap at in practice?

The Ultra160 SCSI interface caps at 160 MB/s, so the drive cannot exceed that transfer rate regardless of its 15000 RPM spindle speed.

What physical clearance does the 1.0-inch low-profile 3.5-inch form factor require?

The drive needs a standard 3.5-inch bay with at least 1.0 inch of vertical clearance for the low-profile height.

How is the 80-pin SCA connector installed, and what step is often missed?

Plug the 80-pin SCA connector directly into a hot-plug backplane; the step often missed is ensuring the backplane supplies termination power so the drive spins up.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.