Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch internal hard drive with 80-pin SCSI connector

Seagate

Seagate ST336752LC 36GB 15000 RPM 8MB SCSI 3.5" internal hard drive

SKU CH-P717-4MFRW MPN ST336752LC

36.7 GB enterprise SCSI drive spins at 15000 RPM with 8 MB cache and 3.6 ms seek time

  • InterfaceSCSI
  • Capacity36GB
  • RPM15000 RPM
  • Cache8MB
  • UsageFor Enterprise Storage
  • Form Factor3.5"
  • 15000 RPM spindle speed accelerates data access
  • 6 ms average seek time reduces latency
  • 8 MB cache buffers bursts for smoother throughput
  • Ultra160 SCSI interface delivers 160 MB/s bandwidth
  • 0 inch low-profile 3.5" form factor fits dense enterprise bays

Enterprise SCSI Drive for Legacy Servers

The Seagate ST336752LC is a 36GB 15000 RPM hard drive with an 8MB cache built for enterprise storage environments. Its SCSI interface targets administrators maintaining or expanding older server and workstation platforms that rely on this bus architecture. The 3.5 inch low-profile form factor measures 1.0 inch in height for dense rack deployments.

Hot-Pluggable 80-Pin Ultra160 Connectivity

An 80-pin Ultra160 SCSI connector supports hot-pluggable installation so drives can be swapped without powering down the host system. The 160 MB/s interface bandwidth matches the 15000 RPM spindle speed and 3.6 ms average seek time to sustain high transaction rates. This mechanical specification suits continuous-duty arrays where uptime and serviceability are primary design constraints.

Direct Replacement for 36GB 15K SCSI Volumes

This drive replaces a failed or degraded 36GB 15000 RPM SCSI unit in existing RAID sets or standalone bays without requiring firmware or cabling changes. The jump is worth it when a compatible spare is needed immediately to restore redundancy or capacity in a certified configuration. Buyers needing larger capacities, different interfaces or non-enterprise workloads should look elsewhere.

Puncte forte

  • 15000 RPM spindle speed accelerates data access
  • 6 ms average seek time reduces latency
  • 8 MB cache buffers bursts for smoother throughput
  • Ultra160 SCSI interface delivers 160 MB/s bandwidth
  • 0 inch low-profile 3.5" form factor fits dense enterprise bays

Specificații

InterfaceSCSI
Capacity36GB
RPM15000 RPM
Cache8MB
UsageFor Enterprise Storage
Form Factor3.5"
Greutate la expediere0.91 kg
Dimensiunile coletului152 × 102 × 51 mm

Întrebări despre acest articol

What throughput does the Ultra160 SCSI interface cap at in practice?

The Ultra160 SCSI interface caps at 160 MB/s, so the drive cannot exceed that transfer rate regardless of its 15000 RPM spindle speed.

What physical clearance does the 1.0-inch low-profile 3.5-inch form factor require?

The drive needs a standard 3.5-inch bay with at least 1.0 inch of vertical clearance for the low-profile height.

How is the 80-pin SCA connector installed, and what step is often missed?

Plug the 80-pin SCA connector directly into a hot-plug backplane; the step often missed is ensuring the backplane supplies termination power so the drive spins up.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.