BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277188BTC
Raktáron
SK hynix
SK hynix 64GB DDR4 2133 CL15 1.2V 4Rx4 LRDIMM B260 M4 v4
64 GB DDR4 2133 CL15 1.2 V 4Rx4 ECC LRDIMM for high-density server workloads
- Capacity64GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 64GB capacity supports dense virtualisation workloads
- DDR4 2133 speed delivers high bandwidth for data-intensive tasks
- CL15 latency provides responsive memory access
- 2V operation reduces power draw in large deployments
- 4Rx4 Load Reduced ECC design maximises reliability and signal integrity
High-density server module
This SK hynix 64GB DDR4 2133 module is a 288-pin LRDIMM with ECC and a 4Rx4 rank structure. It operates at 1.20V with a CAS latency of CL15 and carries Supermicro certification for validated compatibility. The load-reduced design allows higher per-slot capacity in supported platforms.
Suited for memory-bound workloads
Administrators expanding Supermicro-qualified servers or Cisco UCS B-Series B260 M4 v4 systems can use this module to increase total memory without adding slots. It is not for consumer desktops or workstations that require unbuffered non-ECC UDIMMs. Buyers needing registered RDIMM instead of load-reduced LRDIMM should verify their platform requirements before ordering.
64GB 4Rx4 LRDIMM at DDR4 2133
The single specification that determines fit is the 4Rx4 load-reduced organisation combined with DDR4 2133 speed and ECC. Only platforms qualified for this rank structure and voltage will recognise the full 64GB capacity per module.
Erősségek
- 64GB capacity supports dense virtualisation workloads
- DDR4 2133 speed delivers high bandwidth for data-intensive tasks
- CL15 latency provides responsive memory access
- 2V operation reduces power draw in large deployments
- 4Rx4 Load Reduced ECC design maximises reliability and signal integrity
Műszaki adatok
| Brand | SK hynix inc. |
|---|---|
| Model | HMAA8GL7MMR4N-TF (MEM-DR464L-HL01-LR21) |
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Welcome to my Store. Your perfect source for all kinds of Computer, Camera and Phone memory, DRAM, Flash Memory, Camera Cards, USB Drives, Micro SD SDHC SDXC Cards, Please add me to your list of favorite sellers and visit often. This listing contains ECC Memory Modules! These are for servers only and not normal desktops! ECC Registered DIMMs & ECC UDIMMS can not be mixed. If your system came with ECC UDIMMs then use of registered DIMMs will require the removal of all existing UDIMMs. |
Kérdések a termékről
Does the 288-pin DDR4 2133 LRDIMM fit the B260 M4 v4 memory slots?
The module uses the standard 288-pin DDR4 form factor at 2133 MT/s and is Supermicro certified for the B260 M4 v4, so it installs directly into the server's DIMM slots without adapters.
What is the correct way to seat this 4Rx4 64GB ECC module during installation?
Align the notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the system recognises the full 64GB at DDR4 2133 CL15 in BIOS.
Will the 1.20V LRDIMM require any firmware or thermal maintenance over its service life?
The module runs at 1.20V with no heat spreader and no moving parts; ensure the server's airflow remains unobstructed and apply any B260 M4 v4 BIOS updates from Supermicro for continued compatibility.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279767BTC
Raktáron
