BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
SK hynix
64 GB DDR4 2133 CL15 1.2 V 4Rx4 ECC LRDIMM for high-density server workloads
This SK hynix 64GB DDR4 2133 module is a 288-pin LRDIMM with ECC and a 4Rx4 rank structure. It operates at 1.20V with a CAS latency of CL15 and carries Supermicro certification for validated compatibility. The load-reduced design allows higher per-slot capacity in supported platforms.
Administrators expanding Supermicro-qualified servers or Cisco UCS B-Series B260 M4 v4 systems can use this module to increase total memory without adding slots. It is not for consumer desktops or workstations that require unbuffered non-ECC UDIMMs. Buyers needing registered RDIMM instead of load-reduced LRDIMM should verify their platform requirements before ordering.
The single specification that determines fit is the 4Rx4 load-reduced organisation combined with DDR4 2133 speed and ECC. Only platforms qualified for this rank structure and voltage will recognise the full 64GB capacity per module.
| Brand | SK hynix inc. |
|---|---|
| Model | HMAA8GL7MMR4N-TF (MEM-DR464L-HL01-LR21) |
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Welcome to my Store. Your perfect source for all kinds of Computer, Camera and Phone memory, DRAM, Flash Memory, Camera Cards, USB Drives, Micro SD SDHC SDXC Cards, Please add me to your list of favorite sellers and visit often. This listing contains ECC Memory Modules! These are for servers only and not normal desktops! ECC Registered DIMMs & ECC UDIMMS can not be mixed. If your system came with ECC UDIMMs then use of registered DIMMs will require the removal of all existing UDIMMs. |
The module uses the standard 288-pin DDR4 form factor at 2133 MT/s and is Supermicro certified for the B260 M4 v4, so it installs directly into the server's DIMM slots without adapters.
Align the notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, and verify the system recognises the full 64GB at DDR4 2133 CL15 in BIOS.
The module runs at 1.20V with no heat spreader and no moving parts; ensure the server's airflow remains unobstructed and apply any B260 M4 v4 BIOS updates from Supermicro for continued compatibility.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟