Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green circuit board with gold connectors and a flat red cable attached

SMUGDESK

SMUGDESK SATA 3.0 to SAS Riser Card 22Pin to 29Pin 6Gbps with Cable for 2.5" & 3.5" SAS HDD

SKU CH-X3GV-GEV2C

Converts a SATA 22pin port to SAS 29pin for 6Gbps data recovery on 2.5" and 3.5" drives with included cable

  • Converts SATA 22pin to SAS 29pin for enterprise drive access
  • Delivers SATA 3.0 6Gbps bandwidth for fast data recovery
  • Includes SATA cable for immediate plug-and-play setup
  • Supports 2.5inch and 3.5inch SAS hard disk drives
  • Compact PCB ensures stable signal for lab and testing use

SATA 3.0 to SAS riser card

This adapter converts a standard SATA 22pin interface to a SAS 29pin connector, letting a SATA controller communicate with enterprise SAS hard drives. It delivers 3.0 6Gbps bandwidth and includes a matching SATA cable for immediate plug-and-play use. The compact PCB is built for stable signal output in professional environments. It supports both 2.5inch and 3.5inch SAS HDDs for data recovery and testing tasks.

Suited for data recovery and drive testing

Technicians who need to read, test or recover data from SAS drives using a regular SATA host will find this card fits the workflow. It is not for builders who require a multi-lane wide port, SAS expander support or signalling speeds beyond the single 6Gbps link provided by the SATA 3.0 interface. Buyers needing to boot from a SAS drive on a system without native SAS HBA support should verify controller compatibility first.

Single-lane 6Gbps SATA-to-SAS conversion

The decisive specification is the 22pin to 29pin bridge operating at SATA 3.0 6Gbps, which defines the maximum throughput and protocol translation available. This single-lane path determines whether the adapter can meet the bandwidth and connectivity needs of a specific recovery or test scenario. No other interface or speed is offered by this device.

Erősségek

  • Converts SATA 22pin to SAS 29pin for enterprise drive access
  • Delivers SATA 3.0 6Gbps bandwidth for fast data recovery
  • Includes SATA cable for immediate plug-and-play setup
  • Supports 2.5inch and 3.5inch SAS hard disk drives
  • Compact PCB ensures stable signal for lab and testing use

Műszaki adatok

Ehhez a termékhez egyelőre nincs közzétett műszaki adat.

Kérdések a termékről

What is the maximum sustained data rate the SATA 3.0 interface can deliver to the SAS drive?

The SATA 3.0 interface provides up to 6Gbps bandwidth for data transfer to the connected SAS hard drive.

Does the adapter generate noticeable heat or require active cooling during continuous data recovery sessions?

The compact PCB design delivers stable signal output without active cooling, staying within normal operating temperatures during extended use.

Which drive form factors and interfaces must already be present in the host system for this riser card to function?

The host needs a standard SATA 22pin port and a SATA controller; the card then connects 2.5" or 3.5" SAS HDDs via the included 29pin interface.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.