저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with gold connectors and a flat red cable attached

SMUGDESK

SMUGDESK SATA 3.0 to SAS Riser Card 22Pin to 29Pin 6Gbps with Cable for 2.5" & 3.5" SAS HDD

SKU CH-X3GV-GEV2C

Converts a SATA 22pin port to SAS 29pin for 6Gbps data recovery on 2.5" and 3.5" drives with included cable

  • Converts SATA 22pin to SAS 29pin for enterprise drive access
  • Delivers SATA 3.0 6Gbps bandwidth for fast data recovery
  • Includes SATA cable for immediate plug-and-play setup
  • Supports 2.5inch and 3.5inch SAS hard disk drives
  • Compact PCB ensures stable signal for lab and testing use

SATA 3.0 to SAS riser card

This adapter converts a standard SATA 22pin interface to a SAS 29pin connector, letting a SATA controller communicate with enterprise SAS hard drives. It delivers 3.0 6Gbps bandwidth and includes a matching SATA cable for immediate plug-and-play use. The compact PCB is built for stable signal output in professional environments. It supports both 2.5inch and 3.5inch SAS HDDs for data recovery and testing tasks.

Suited for data recovery and drive testing

Technicians who need to read, test or recover data from SAS drives using a regular SATA host will find this card fits the workflow. It is not for builders who require a multi-lane wide port, SAS expander support or signalling speeds beyond the single 6Gbps link provided by the SATA 3.0 interface. Buyers needing to boot from a SAS drive on a system without native SAS HBA support should verify controller compatibility first.

Single-lane 6Gbps SATA-to-SAS conversion

The decisive specification is the 22pin to 29pin bridge operating at SATA 3.0 6Gbps, which defines the maximum throughput and protocol translation available. This single-lane path determines whether the adapter can meet the bandwidth and connectivity needs of a specific recovery or test scenario. No other interface or speed is offered by this device.

주요 특징

  • Converts SATA 22pin to SAS 29pin for enterprise drive access
  • Delivers SATA 3.0 6Gbps bandwidth for fast data recovery
  • Includes SATA cable for immediate plug-and-play setup
  • Supports 2.5inch and 3.5inch SAS hard disk drives
  • Compact PCB ensures stable signal for lab and testing use

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

What is the maximum sustained data rate the SATA 3.0 interface can deliver to the SAS drive?

The SATA 3.0 interface provides up to 6Gbps bandwidth for data transfer to the connected SAS hard drive.

Does the adapter generate noticeable heat or require active cooling during continuous data recovery sessions?

The compact PCB design delivers stable signal output without active cooling, staying within normal operating temperatures during extended use.

Which drive form factors and interfaces must already be present in the host system for this riser card to function?

The host needs a standard SATA 22pin port and a SATA controller; the card then connects 2.5" or 3.5" SAS HDDs via the included 29pin interface.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.