Solidigm D7-P5520 1.92TB E1.S 15mm PCIe 4.0 enterprise SSD SSDPFVKX019T1N1
- E1.S 15mm
- 1.92TB
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Solidigm
1.92 TB U.2 15 mm enterprise SSD with PCIe 4.0, 144-layer TLC 3D NAND, up to 5300 MB/s read and 1900 MB/s write, Opal security, 2,000,000-hour MTBF
Options 1.92TB, U.2 15mm, OPAL
The Solidigm D7-P5520 is a 1.92TB U.2 15mm enterprise SSD built for data-centre and server workloads. It uses 144L TLC 3D NAND and a PCI-Express 4.0 interface to deliver sequential reads up to 5300 MBps and writes up to 1900 MBps. The drive targets administrators who need consistent throughput for mixed read-write applications in a 2.5-inch bay.
Hardware-based Opal encryption secures data at rest without host software overhead. This feature simplifies compliance for regulated environments and allows instant secure erase when drives are retired. The single-pack delivery contains only the drive itself, so brackets, cables or management software licences must be sourced separately.
The 15mm Z-height fits standard 2.5-inch U.2 backplanes that accept thick drives; thinner bays will reject it. Installers must verify the backplane supplies PCIe 4.0 x4 lanes and adequate airflow for sustained write loads. A common issue is connecting the drive to a backplane wired for fewer lanes, which caps performance well below the rated speeds.
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Model | D7-P5520 |
| Form Factor | U.2 15mm |
| Capacity | 1.92TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 5300 MBps |
| Max Sequential Write | Up to 1900 MBps |
| MTBF | 2,000,000 hours |
| Security | Opal |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Szállítási súly | 0.45 kg |
| Csomagméret | 203 × 152 × 127 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive carries a 2,000,000 hour MTBF rating; actual write endurance depends on workload but the 1.92TB capacity provides substantial over-provisioning for mixed read-write cycles.
The 1900 MBps figure is a maximum burst rate; sustained throughput will be limited by thermal throttling and controller firmware once the 15mm U.2 form factor reaches its thermal envelope.
The U.2 15mm design fits standard 2.5-inch hot-swap bays; power draw scales with the 5300 MBps read and 1900 MBps write activity, so sustained use increases both heat and fan demand in the chassis.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?