Solidigm D7-P5520 1.92TB E1.S 15mm PCIe 4.0 enterprise SSD SSDPFVKX019T1N1
- E1.S 15mm
- 1.92TB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Solidigm
1.92 TB U.2 15 mm enterprise SSD with PCIe 4.0, 144-layer TLC 3D NAND, up to 5300 MB/s read and 1900 MB/s write, Opal security, 2,000,000-hour MTBF
Options 1.92TB, U.2 15mm, OPAL
The Solidigm D7-P5520 is a 1.92TB U.2 15mm enterprise SSD built for data-centre and server workloads. It uses 144L TLC 3D NAND and a PCI-Express 4.0 interface to deliver sequential reads up to 5300 MBps and writes up to 1900 MBps. The drive targets administrators who need consistent throughput for mixed read-write applications in a 2.5-inch bay.
Hardware-based Opal encryption secures data at rest without host software overhead. This feature simplifies compliance for regulated environments and allows instant secure erase when drives are retired. The single-pack delivery contains only the drive itself, so brackets, cables or management software licences must be sourced separately.
The 15mm Z-height fits standard 2.5-inch U.2 backplanes that accept thick drives; thinner bays will reject it. Installers must verify the backplane supplies PCIe 4.0 x4 lanes and adequate airflow for sustained write loads. A common issue is connecting the drive to a backplane wired for fewer lanes, which caps performance well below the rated speeds.
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Model | D7-P5520 |
| Form Factor | U.2 15mm |
| Capacity | 1.92TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 5300 MBps |
| Max Sequential Write | Up to 1900 MBps |
| MTBF | 2,000,000 hours |
| Security | Opal |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Lähetyspaino | 0.45 kg |
| Pakkauksen mitat | 203 × 152 × 127 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The drive carries a 2,000,000 hour MTBF rating; actual write endurance depends on workload but the 1.92TB capacity provides substantial over-provisioning for mixed read-write cycles.
The 1900 MBps figure is a maximum burst rate; sustained throughput will be limited by thermal throttling and controller firmware once the 15mm U.2 form factor reaches its thermal envelope.
The U.2 15mm design fits standard 2.5-inch hot-swap bays; power draw scales with the 5300 MBps read and 1900 MBps write activity, so sustained use increases both heat and fan demand in the chassis.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?