Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Solidigm

Solidigm D7-P5520 7.68TB U.2 15mm enterprise SSD SSDPF2KX076T1N1

SKU CH-7F5V-74B7D MPN SSDPF2KX076T1N1

Enterprise U.2 15mm SSD with 7.68TB of 144L TLC 3D NAND, PCIe 4.0 x4, 7100 MBps read, 4200 MBps write, 2,000,000-hour MTBF

  • Form FactorU.2 15mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 7100 MBps
  • Max Sequential WriteUp to 4200 MBps
  • Massive 7.68 TB capacity stores vast datasets
  • PCIe 4.0 x4 interface delivers up to 7100 MB/s sequential reads
  • 144-layer TLC 3D NAND enables up to 4200 MB/s sequential writes
  • 2,000,000-hour MTBF ensures long-term data-centre reliability
  • 1000 G shock and 2.17 GRMS vibration resistance protects data integrity

Enterprise U.2 15mm 7.68TB drive

The Solidigm D7-P5520 is a 7.68TB enterprise SSD built for 2.5-inch U.2 bays with a 15mm z-height. It connects through a PCIe 4.0 x4 interface and uses 144L TLC 3D NAND. Sequential reads reach up to 7100 MBps and writes up to 4200 MBps. The drive carries a 2,000,000-hour MTBF rating and is rated for 1,000 G shock at 0.5 msec.

Fits dense read-heavy servers.

This drive suits data-centre nodes that need high-capacity, read-optimised storage in a standard 15mm U.2 slot. It also supports health reporting over PCIe and SMBus without interrupting I/O, plus concurrent TRIM and expanded LBA formats for metadata handling. Builders whose chassis only accept 7mm U.2 or M.2 form factors cannot use this 15mm module.

Deciding spec: 15mm U.2 form factor

The single specification that determines fitment is the 15mm U.2 form factor. Verify that the server or storage array explicitly supports 15mm 2.5-inch U.2 drives before ordering.

Kohokohdat

  • Massive 7.68 TB capacity stores vast datasets
  • PCIe 4.0 x4 interface delivers up to 7100 MB/s sequential reads
  • 144-layer TLC 3D NAND enables up to 4200 MB/s sequential writes
  • 2,000,000-hour MTBF ensures long-term data-centre reliability
  • 1000 G shock and 2.17 GRMS vibration resistance protects data integrity

Tekniset tiedot

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorU.2 15mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 7100 MBps
Max Sequential WriteUp to 4200 MBps
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Lähetyspaino0.45 kg
Pakkauksen mitat203 × 152 × 127 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 7.68TB D7-P5520 throttle under sustained write workloads?

Sequential write is rated up to 4200 MBps; sustained use will stay within that limit and the drive's thermal design for U.2 15mm bays.

How much heat and power does the 15mm U.2 drive produce during all-day operation?

The PCIe 4.0 x4 interface and 144L TLC NAND are built for data-centre thermal envelopes; typical steady-state power fits standard 2.5-inch U.2 cooling.

What host connector and bus does the SSDPF2KX076T1N1 require?

It needs a U.2 backplane wired for PCI-Express 4.0 x4; the 15mm height also requires a bay that accepts 15mm drives.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.