Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular E1.S 9.5mm enterprise SSD with green circuit board and silver label

Solidigm

Solidigm D7-P5520 7.68TB E1.S 9.5mm enterprise SSD (SSDPFUKX076T1N1)

SKU CH-3QSN-QVNVN MPN SSDPFUKX076T1N1

7.68 TB E1.S 9.5 mm enterprise SSD with PCIe 4.0 x4 and 144-layer TLC 3D NAND

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Max Shock Resistance1,000 G (Max) at 0.5 msec

Options 7.68TB, E1.S 9.5mm, Non-OPAL

Näytä 2 muuta kokoonpanoa
  • High capacity supports dense server workloads with 7.68TB storage
  • PCIe 4.0 interface enables fast data transfer for enterprise applications
  • 144-layer TLC 3D NAND delivers reliable endurance in data-centre environments
  • 2,000,000-hour MTBF ensures long-term operational stability
  • E1.S 9.5mm form factor fits compact high-density server chassis

Server storage density

The Solidigm D7-P5520 delivers 7.68TB in an E1.S 9.5mm form factor built for dense server deployments. Its 144L TLC 3D NAND and PCI-Express 4.0 x4 interface serve read-intensive workloads that demand high capacity per slot. Data-centre operators who need maximum terabytes per rack unit will match this drive to their chassis. Buyers who require a different physical connector or lower capacity should look elsewhere.

Thermal and power behaviour

The drive carries a 2,000,000-hour MTBF rating for continuous operation in cooled enclosures. It withstands 1,000 G shock at .5 msec and 2.17 GRMS vibration from 5 to 700 Hz while running. Non-operating vibration tolerance reaches 3.13 GRMS across 5 to 800 Hz. These figures confirm suitability for standard server airflow designs without additional cooling provisions.

Capacity decision point

The single specification that determines fit is the 7.68TB capacity combined with the E1.S 9.5mm form factor. Systems must provide an E1.S cage and PCIe 4.0 x4 electricals to use the drive. If the chassis accepts only U.2, M.2 or a thicker E1.S variant, this unit cannot be installed.

Kohokohdat

  • High capacity supports dense server workloads with 7.68TB storage
  • PCIe 4.0 interface enables fast data transfer for enterprise applications
  • 144-layer TLC 3D NAND delivers reliable endurance in data-centre environments
  • 2,000,000-hour MTBF ensures long-term operational stability
  • E1.S 9.5mm form factor fits compact high-density server chassis

Tekniset tiedot

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Lähetyspaino0.17 kg
Pakkauksen mitat432 × 313 × 140 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the E1.S 9.5mm drive into my server backplane?

Slide the drive into the E1.S hot-plug cage until the connector seats and the latch clicks; the step most people miss is fully engaging the latch so the PCIe 4.0 x4 link trains at full speed.

What maintenance will the 7.68TB SSD need over its service life?

No scheduled maintenance is required; the 144L TLC 3D NAND is managed by the controller, and the drive is rated for 2,000,000 hours MTBF under normal operating conditions.

What limit appears first during sustained heavy writes on this drive?

The controller will throttle write performance once the NAND temperature approaches its thermal limit, protecting the 144L TLC 3D NAND from exceeding safe operating temperatures.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.