Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular E1.S 9.5mm enterprise SSD with green circuit board and silver label

Solidigm

Solidigm D7-P5520 7.68TB E1.S 9.5mm enterprise SSD (SSDPFUKX076T1N1)

SKU CH-3QSN-QVNVN MPN SSDPFUKX076T1N1

7.68 TB E1.S 9.5 mm enterprise SSD with PCIe 4.0 x4 and 144-layer TLC 3D NAND

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Max Shock Resistance1,000 G (Max) at 0.5 msec

Options 7.68TB, E1.S 9.5mm, Non-OPAL

Visa 2 fler konfigurationer
  • High capacity supports dense server workloads with 7.68TB storage
  • PCIe 4.0 interface enables fast data transfer for enterprise applications
  • 144-layer TLC 3D NAND delivers reliable endurance in data-centre environments
  • 2,000,000-hour MTBF ensures long-term operational stability
  • E1.S 9.5mm form factor fits compact high-density server chassis

Server storage density

The Solidigm D7-P5520 delivers 7.68TB in an E1.S 9.5mm form factor built for dense server deployments. Its 144L TLC 3D NAND and PCI-Express 4.0 x4 interface serve read-intensive workloads that demand high capacity per slot. Data-centre operators who need maximum terabytes per rack unit will match this drive to their chassis. Buyers who require a different physical connector or lower capacity should look elsewhere.

Thermal and power behaviour

The drive carries a 2,000,000-hour MTBF rating for continuous operation in cooled enclosures. It withstands 1,000 G shock at .5 msec and 2.17 GRMS vibration from 5 to 700 Hz while running. Non-operating vibration tolerance reaches 3.13 GRMS across 5 to 800 Hz. These figures confirm suitability for standard server airflow designs without additional cooling provisions.

Capacity decision point

The single specification that determines fit is the 7.68TB capacity combined with the E1.S 9.5mm form factor. Systems must provide an E1.S cage and PCIe 4.0 x4 electricals to use the drive. If the chassis accepts only U.2, M.2 or a thicker E1.S variant, this unit cannot be installed.

I korthet

  • High capacity supports dense server workloads with 7.68TB storage
  • PCIe 4.0 interface enables fast data transfer for enterprise applications
  • 144-layer TLC 3D NAND delivers reliable endurance in data-centre environments
  • 2,000,000-hour MTBF ensures long-term operational stability
  • E1.S 9.5mm form factor fits compact high-density server chassis

Specifikationer

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Fraktvikt0.17 kg
Paketstorlek432 × 313 × 140 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I install the E1.S 9.5mm drive into my server backplane?

Slide the drive into the E1.S hot-plug cage until the connector seats and the latch clicks; the step most people miss is fully engaging the latch so the PCIe 4.0 x4 link trains at full speed.

What maintenance will the 7.68TB SSD need over its service life?

No scheduled maintenance is required; the 144L TLC 3D NAND is managed by the controller, and the drive is rated for 2,000,000 hours MTBF under normal operating conditions.

What limit appears first during sustained heavy writes on this drive?

The controller will throttle write performance once the NAND temperature approaches its thermal limit, protecting the 144L TLC 3D NAND from exceeding safe operating temperatures.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.