Solidigm SB5PHA7E064TOP1 6.4TB E3.S 7.5mm PCIe 5.0 enterprise SSD
- E3.S 7.5mm
- 6.4TB
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Solidigm
Enterprise 6.4TB E3.S 7.5mm drive with PCIe 5.0 x4, 14500 MBps read, 10000 MBps write, 3 DWPD endurance
Option 6.4TB E3.S
The Solidigm D7-PS1030 is a 6.4TB enterprise solid-state drive built for data-centre servers. It uses 176L TLC 3D NAND and a PCI-Express 5.0 x4 interface to deliver high throughput for read-intensive workloads. The E3.S 7.5mm form factor fits dense 1U and 2U chassis designed for this standard.
The 7.5mm E3.S design supports hot-plug installation in compatible backplanes, allowing drive replacement without system downtime. Weighing 110g, the drive connects directly through the edge connector with no separate power or data cables. This layout simplifies cabling and improves airflow in tightly packed server racks.
Idle power draw is 5W and active consumption reaches 23W, so thermal planning must account for sustained write loads. The drive operates from 0°C to 77°C and meets shock resistance of 1,000 G at 0.5 msec. Vibration tolerance is rated at 2.17 GRMS operating and 3.13 GRMS non-operating across the stated frequency ranges.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PHA7E064T001 |
| Form Factor | E3.S 7.5mm |
| Capacity | 6.4TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 10000 MBps |
| 4KB Random Read | 3000000 IOPS (4K Blocks) |
| 4KB Random Write | 800000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 35 PBW |
| MTBF | 2,500,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 110g +/- 10g |
| Szállítási súly | 0.17 kg |
| Csomagméret | 140 × 110 × 17 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive reaches up to 14500 MBps sequential read and 10000 MBps sequential write over PCIe 5.0 x4.
It fits a standard E3.S bay with a 7.5mm z-height and weighs 110g ±10g.
Slide the drive into the hot-plug E3.S cage until the latch clicks, then verify the PCIe 5.0 link negotiates at x4 in the BIOS.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?