Solidigm D7-PS1010 7.68TB E3.S 7.5mm PCIe 5.0 enterprise SSD SB5PHA7X076TOF1
- E3.S 7.5mm
- 7.68TB
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Solidigm
E3.S 7.5mm enterprise SSD with 7.68TB capacity, PCIe 5.0 interface, up to 14500 MBps read and 10000 MBps write
Option 7.68TB E3.S
This 7.68TB Solidigm D7-PS1010 drive fits the E3.S 7.5mm form factor and connects through a PCIe 5.0 x4 link. It targets data-centre operators who need high-capacity flash in a compact, hot-pluggable tray. The 176L TLC 3D NAND delivers 1 DWPD endurance rated at 14 PBW.
The drive reaches 14500 MBps sequential read and 10000 MBps sequential write within the four-lane PCIe 5.0 interface. Random performance peaks at 3000000 read IOPS and 400000 write IOPS. Active power draws 23W and the operating range stops at 77°C, so chassis airflow must dissipate that heat without exceeding the limit.
Verify the server has an E3.S 7.5mm bay with a PCIe 5.0 x4 electrical connection and a backplane that can supply 23W per drive. Confirm the cooling design keeps the drive at or below 77°C under sustained load. The 110g weight and 1000 G shock rating suit standard enterprise trays, but the bay must accept the 7.5mm thickness.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1010 |
| Part Number | SB5PHA7X076T001 |
| Form Factor | E3.S 7.5mm |
| Capacity | 7.68TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 10000 MBps |
| 4KB Random Read | 3000000 IOPS (4K Blocks) |
| 4KB Random Write | 400000 IOPS (4K Blocks) |
| Endurance | 1 DWPD / 14 PBW |
| MTBF | 2,500,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 110g +/- 10g |
| Szállítási súly | 0.17 kg |
| Csomagméret | 140 × 110 × 17 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
This model is offered in a single 7.68TB capacity with 1 DWPD endurance, rated for 14 PBW total writes.
It represents the maximum sustained read throughput under ideal PCIe 5.0 conditions; actual throughput depends on workload, queue depth and system cooling.
The drive uses a PCIe 5.0 x4 link, so peak bandwidth is limited by the four-lane electrical interface and the 23W active power envelope.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?