Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small black circuit board with gold edge connector and M.2 slot

SoNNeT ST-NGFF2013 M.2 nVME SSD Adapter Card MacBook Air 2013-2017 Pro 2013-2015

SKU CH-64XC-SBA0Y

Adapts 2013-2017 MacBook Air and 2013-2015 MacBook Pro to accept nVME SSDs

  • ColorBlack
  • Changer TypeSATA
  • SpecificationsST-NGFF2013, 2013-2017 MACBOOK AIR SSD CONNECTOR, 1, 1 L x 0
  • Connector A2013-2017 MACBOOK AIR SSD CONNECTOR
  • Connector B2013-2017 MACBOOK AIR SSD CONNECTOR
  • Connector PlatingBlack
  • Upgrade 2013-2017 MacBook Air storage with NVMe speed
  • Upgrade late 2013-2015 MacBook Pro storage with NVMe speed
  • Works with Adata SX6000, SX7000, SX8200 and SX8200 Pro NVMe drives
  • Works with Intel 600p, 660p and 760p NVMe drives
  • Weighs 10 grams for minimal added weight

MacBook SSD upgrade adapter

The SoNNeT ST-NGFF2013 adapter card lets owners of MacBook Air models from 2013 through 2017 and MacBook Pro models from late 2013 through mid 2015 install a standard M.2 nVME SSD. It replaces the proprietary Apple connector with a widely available drive interface.

Proprietary connector limits

The card bridges the 2013-2017 MacBook Air SSD connector to an M.2 slot using a SATA changer type. Internet recovery is not supported so a bootable USB installer must be prepared. Hibernation on 2013-2014 Macs requires a software workaround and an NVRAM reset may be needed after macOS installation.

Supported drive compatibility

The adapter works with listed Adata SX6000, SX7000, SX8200 and SX8200 Pro drives, Corsair MP500 and MP510, Crucial P1, HP ex920 and ex950, Intel 600p, 660p and 760p, Toshiba XG3 through XG6, Samsung 960 and 970 series and WD v1 through v3. It does not support PM981, 950 Pro or WD Blue SN570 and SN770.

Erősségek

  • Upgrade 2013-2017 MacBook Air storage with NVMe speed
  • Upgrade late 2013-2015 MacBook Pro storage with NVMe speed
  • Works with Adata SX6000, SX7000, SX8200 and SX8200 Pro NVMe drives
  • Works with Intel 600p, 660p and 760p NVMe drives
  • Weighs 10 grams for minimal added weight

Műszaki adatok

BrandSoNNeT
SeriesST-NGFF2013
ModelST-NGFF2013
Part NumberST-NGFF2013
ColorBlack
Changer TypeSATA
SpecificationsST-NGFF2013, 2013-2017 MACBOOK AIR SSD CONNECTOR, 1, 1 L x 0.04 W x 0.012 H inches, 10 grams, Black, Sintech, Laptop
Connector A2013-2017 MACBOOK AIR SSD CONNECTOR
Connector B2013-2017 MACBOOK AIR SSD CONNECTOR
Connector PlatingBlack
Connector StyleStandard
Features2013-2017 MACBOOK AIR SSD CONNECTOR, Black, Laptop, 1, Sintech, ST-NGFF2013
Dimensions20'
Weight10 grams
Package Quantity1

Kérdések a termékről

Which SoNNeT ST-NGFF2013 version fits my MacBook Air 2015?

The single ST-NGFF2013 model fits MacBook Air 2013 through 2017 and MacBook Pro late 2013 to mid 2015; no other capacity or version is offered.

What speed will an NVMe SSD reach through this adapter?

The adapter passes the Mac's native PCIe 2.0 x2 link, so supported NVMe drives run at the host's maximum throughput rather than their rated peak.

Does the SATA-type changer limit the NVMe drives I can use?

The SATA designation describes the form-factor conversion; the card carries a PCIe signal and supports listed NVMe models such as ADATA SX8200 Pro, Intel 760p and Samsung 970 Evo.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.