Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black metal four-bay mobile rack backplane with two 40 mm fans and lockable trays

STARTECH

STARTECH SATSASBP425 4-bay 2.5in SATA SAS mobile rack backplane ssd accessory

SKU CH-SH0G-G0ZVB MPN SATSASBP425

A four-bay mobile rack backplane fits four 2.5in SATA or SAS drives into one 5.25in bay with lockable trays and dual 40 mm fans

  • ColorBlack
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseMultiple Drives
  • Compatible Products2.5"
  • SpecificationsCompatible Drive Types (Type and Rate): SAS & SATA Drive Ins
  • FeaturesBuild your storage system by adding four 2.5in SAS or SATA d

Model 5.25in

  • PCI Expansion Card Slot
  • 5.25in

Az áthúzott konfigurációk léteznek, de nem érhetők el itt.

Option 4-Bay (2.5in SATA/SAS)

  • 4-Bay (2.5in SATA/SAS)
  • 1-Bay (2.5in SATA)

Az áthúzott konfigurációk léteznek, de nem érhetők el itt.

  • Hot-swap four drives in a single 5.25in bay
  • Supports 2.5in SAS and SATA drives from 5-15mm
  • Lockable removable trays rated for 50000 insertions
  • Dual 40mm sleeve-bearing fans keep drives cool
  • Durable metal housing protects drives during transport

Four-bay 2.5in SATA/SAS mobile rack

The StarTech.com SATSASBP425 fits four 2.5in SAS or SATA drives into a single 5.25in bay. Removable trays with a key lock enable hot-swap operation for quick drive changes. Two 40 mm sleeve-bearing fans provide active cooling for the installed drives. The unit supports drive thicknesses from 5 mm to 15 mm.

Suited for hot-swap SAS/SATA arrays

This backplane suits builders who want removable 2.5in drives in a standard 5.25in slot with hardware RAID or software arrays. The 50,000-plus insertion rating and metal housing support frequent swaps for backup or drive-sharing workflows. Systems that require more than four drive bays or a different drive form factor will need another solution. Builds without a 5.25in bay cannot install this unit.

SATA and SAS 6 Gbps interface

The backplane connects each tray through SATA I, II, III and SAS interfaces at up to 6 Gbps. This single specification determines whether the host controller and drives can communicate at full speed. Compatibility with 5 mm to 15 mm drives covers most 2.5in SSDs and HDDs including the Samsung 840 EVO.

Erősségek

  • Hot-swap four drives in a single 5.25in bay
  • Supports 2.5in SAS and SATA drives from 5-15mm
  • Lockable removable trays rated for 50000 insertions
  • Dual 40mm sleeve-bearing fans keep drives cool
  • Durable metal housing protects drives during transport

Műszaki adatok

BrandStarTech.com
ModelSATSASBP425
ColorBlack
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsCompatible Drive Types (Type and Rate): SAS & SATA
Drive Installation: Removable
Drive Size: 2.5in
Fan Bearing Type: Sleeve Bearing
Fan(s): Yes
Fans: 2 - 40 mm
Interface:
SATA
SAS
Key Lock: Yes
Number of 2.5 inch bays: 4
Number of Drives: 4
Supported Drive Height(s):
5mm
9.5mm
12.5mm
15mm
Hot Swap Capability: Yes
Insertion Rating: 50,000
Max Drive Capacity: Tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 6 Gbps
MTBF: 30,000
Noise Level: 20 dBA
Port Multiplier: No
Type and Rate: SATA III (6 Gbps)
Drive Connectors: 4 - SATA Data & Power Combo (7+15 pin) Recep
FeaturesBuild your storage system by adding four 2.5in SAS or SATA drives into one 5.25in bay
Supports a wide range of SSDs and HDDs from 5-15mm
Easy, error free insertion of tray with vertically or horizontally mounted backplane
Lockable, removable trays provide drive protection
NSS connector provides 50,000+ insertion rating for long-lasting performance
Interchangeable drive trays also work with the 1-bay backplane (SATSASBP125)
High-quality metal housing provides enhanced heat dissipation
Two 40mm fans to optimize ventilation
Flammability rating of UL 94 V-O
Support for SAS II and SATA I,
Szállítási súly1.08 kg
Csomagméret218 × 201 × 81 mm

Kérdések a termékről

Will the SATSASBP425 fit into the 5.25in bay on my older desktop case?

Yes, the unit mounts in a single 5.25in bay and accepts four 2.5in SATA or SAS drives up to 15mm thick, so existing drives you already own will install without adapters.

How can I verify the SATSASBP425 is operating correctly once installed?

The two 40mm sleeve-bearing fans should spin up immediately, the tray key locks will engage with a click, and each drive appears in BIOS or OS disk management at full SATA III or SAS II 6 Gbps link speed.

What comes with the SATSASBP425 and what must I supply?

The package includes the backplane, four lockable removable trays, mounting hardware and two pre-installed 40mm fans; you provide the 2.5in SATA or SAS drives and the host SATA or SAS cables.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.