Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Supermicro

Supermicro USB2RJ45 IPMI Remote Management Card laptop replacement part

SKU CH-HSWN-0GV65 MPN USB2RJ45

Adds IPMI remote management with an RJ45 port to compatible SuperMicro servers via an internal USB header

  • Compatible ManufacturerFor SuperMicro
  • Compatible ModelsFor SuperMicro PDSM4+, PDSME+, X7DA3, X7DA8, X7DAE, X7DB3, X
  • Dimensions2.7 x 0.8 x 0.6 inches
  • Weight0.05 lbs
  • IPMI remote management via RJ45 for headless servers
  • USB 2.0 to RJ45 bracket connects to internal header
  • Fits SuperMicro PDSM4+, X7 and H8 series motherboards
  • Compact card measures 2.7 x 0.8 x 0.6 inches
  • Lightweight design at 0.05 lbs for easy install

Supermicro IPMI Remote Management Card

The Supermicro USB2RJ45 card adds a dedicated RJ45 port for IPMI and KVM over IP access on compatible Supermicro server boards. It targets administrators who need out-of-band control of headless systems without occupying a full PCIe slot.

Sustained remote-session stability

The card draws power from an internal USB 2.0 header and maintains a persistent management network link independent of the host operating system. Long KVM sessions stay responsive because the dedicated Ethernet interface does not share bandwidth with production traffic.

Installation notes

Mount the low-profile bracket (2.7 x 0.8 x 0.6 inches, 0.05 lbs) into a PCI Express x4 slot and connect the 8-inch mini-USB cable to the motherboard header. The only common issue is forgetting to enable the IPMI LAN channel in the BMC firmware before first use.

Erősségek

  • IPMI remote management via RJ45 for headless servers
  • USB 2.0 to RJ45 bracket connects to internal header
  • Fits SuperMicro PDSM4+, X7 and H8 series motherboards
  • Compact card measures 2.7 x 0.8 x 0.6 inches
  • Lightweight design at 0.05 lbs for easy install

Műszaki adatok

BrandSuperMicro
ModelUSB2RJ45
Part NumberAOC-USB2RJ45
Compatible ManufacturerFor SuperMicro
Compatible ModelsFor SuperMicro PDSM4+, PDSME+, X7DA3, X7DA8, X7DAE, X7DB3, X7DB8, X7DBE+, X7DB8-X, X7DBE-X, X7DBN, X7DVA-8, X7DVA-8, X7DVA-E, X7DVL-E, H8SMi-2, H8QM3-2, H8QMi-2, H8DM8-2, H8DME-2
Dimensions2.7 x 0.8 x 0.6 inches
Weight0.05 lbs

Kérdések a termékről

Does the USB2RJ45 card add noticeable heat or power draw when running continuously?

The card weighs .05 lbs and measures 2.7 x .8 x .6 inches, so its thermal and power footprint is negligible in a server chassis.

What existing server hardware is required to install this IPMI card?

You need a compatible SuperMicro motherboard with an internal USB 2.0 header and a free PCI Express x4 slot for the AOC-USB2RJ45 bracket.

Will this card work with an older X7DVA-E board I still use?

Yes, the X7DVA-E is listed among the supported models for the USB2RJ45 remote management card.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.