Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small green circuit board with silver RJ45 port and mini USB connector on short cable

Supermicro

Supermicro USB2RJ45 IPMI Remote Management Card laptop replacement part

SKU CH-HSWN-0GV65 MPN USB2RJ45

Adds IPMI remote management with an RJ45 port to compatible SuperMicro servers via an internal USB header

  • Compatible ManufacturerFor SuperMicro
  • Compatible ModelsFor SuperMicro PDSM4+, PDSME+, X7DA3, X7DA8, X7DAE, X7DB3, X
  • Dimensions2.7 x 0.8 x 0.6 inches
  • Weight0.05 lbs
  • IPMI remote management via RJ45 for headless servers
  • USB 2.0 to RJ45 bracket connects to internal header
  • Fits SuperMicro PDSM4+, X7 and H8 series motherboards
  • Compact card measures 2.7 x 0.8 x 0.6 inches
  • Lightweight design at 0.05 lbs for easy install

Supermicro IPMI Remote Management Card

The Supermicro USB2RJ45 card adds a dedicated RJ45 port for IPMI and KVM over IP access on compatible Supermicro server boards. It targets administrators who need out-of-band control of headless systems without occupying a full PCIe slot.

Sustained remote-session stability

The card draws power from an internal USB 2.0 header and maintains a persistent management network link independent of the host operating system. Long KVM sessions stay responsive because the dedicated Ethernet interface does not share bandwidth with production traffic.

Installation notes

Mount the low-profile bracket (2.7 x 0.8 x 0.6 inches, 0.05 lbs) into a PCI Express x4 slot and connect the 8-inch mini-USB cable to the motherboard header. The only common issue is forgetting to enable the IPMI LAN channel in the BMC firmware before first use.

Najważniejsze cechy

  • IPMI remote management via RJ45 for headless servers
  • USB 2.0 to RJ45 bracket connects to internal header
  • Fits SuperMicro PDSM4+, X7 and H8 series motherboards
  • Compact card measures 2.7 x 0.8 x 0.6 inches
  • Lightweight design at 0.05 lbs for easy install

Specyfikacja

BrandSuperMicro
ModelUSB2RJ45
Part NumberAOC-USB2RJ45
Compatible ManufacturerFor SuperMicro
Compatible ModelsFor SuperMicro PDSM4+, PDSME+, X7DA3, X7DA8, X7DAE, X7DB3, X7DB8, X7DBE+, X7DB8-X, X7DBE-X, X7DBN, X7DVA-8, X7DVA-8, X7DVA-E, X7DVL-E, H8SMi-2, H8QM3-2, H8QMi-2, H8DM8-2, H8DME-2
Dimensions2.7 x 0.8 x 0.6 inches
Weight0.05 lbs

Pytania dotyczące tego produktu

Does the USB2RJ45 card add noticeable heat or power draw when running continuously?

The card weighs .05 lbs and measures 2.7 x .8 x .6 inches, so its thermal and power footprint is negligible in a server chassis.

What existing server hardware is required to install this IPMI card?

You need a compatible SuperMicro motherboard with an internal USB 2.0 header and a free PCI Express x4 slot for the AOC-USB2RJ45 bracket.

Will this card work with an older X7DVA-E board I still use?

Yes, the X7DVA-E is listed among the supported models for the USB2RJ45 remote management card.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.