Syba
Syba SI-PEX50065 PCIe x1 to M.2 + SATA 6G expansion card
Adds one M.2 B-key slot and one SATA 6.0 Gbps port via PCIe x1 with RAID 0/1 and HyperDuo tiering
- Data Transfer Rate6.0 Gbps
- FeaturesMarvell Chipset: 88SE9130 M.2 Specification Revision 0.9 Ser
- Dimensions1.50" x 5.50" x 7.00" (H x W x L)
- Weight0.3125
- Package Contents1 x PCIe to M.2 and SATA 6G card 1 x Driver CD 1 x User Manu
- Adds M.2 and SATA 6.0 Gbps storage via a single PCIe x1 slot
- Supports M.2 B-key cards from 22×30 to 22×110 mm
- Marvell 88SE9130 chipset provides hardware RAID 0/1 and HyperDuo tiering
- Includes low-profile bracket for small-form-factor builds
- Driver CD, SATA cable and M.2 screws supplied for immediate installation
PCIe x1 M.2 and SATA 6G adapter
The Syba SI-PEX50065 adds one M.2 slot and one SATA 6G port through a single PCIe x1 lane. It uses a Marvell 88SE9130 chipset to provide hardware RAID 0 and 1 plus HyperDuo tiering between the two drives. A low-profile bracket is included for small-form-factor cases.
Builders who want two 6Gbps drives on a spare x1
This card suits systems that have a free PCIe x1 slot and need both an M.2 SATA SSD and a 2.5-inch SATA drive under hardware RAID. It does not help builders who need more than two drives or who require a PCIe x4 or x8 link for higher throughput.
Supports M.2 B-key sizes 2230 through 22110
The slot accepts B-key modules measuring 22 by 30, 42, 60, 80 or 110 millimetres. SATA 6Gbps is the maximum transfer rate for both the M.2 and the standard SATA connector.
Erősségek
- Adds M.2 and SATA 6.0 Gbps storage via a single PCIe x1 slot
- Supports M.2 B-key cards from 22×30 to 22×110 mm
- Marvell 88SE9130 chipset provides hardware RAID 0/1 and HyperDuo tiering
- Includes low-profile bracket for small-form-factor builds
- Driver CD, SATA cable and M.2 screws supplied for immediate installation
Műszaki adatok
| Brand | SYBA |
|---|---|
| Model | SI-PEX50065 |
| Data Transfer Rate | 6.0 Gbps |
| Features | Marvell Chipset: 88SE9130 M.2 Specification Revision 0.9 Serial ATA Specification Revision 3.2 Support M.2 card size: 22*30 22*42 22*60 22*80 22*110 Supports M.2 B Key Card Type Maximum 6Gbps Port Multiplier Compatible Hot Swap Compatible with SATA I, II, III NCQ Supported |
| Dimensions | 1.50" x 5.50" x 7.00" (H x W x L) |
| Weight | 0.3125 |
| Package Contents | 1 x PCIe to M.2 and SATA 6G card 1 x Driver CD 1 x User Manual 1 x SATA data cable 1 x M.2 Screw set 1 x Low Profile Bracket |
| Szállítási súly | 0.13 kg |
| Csomagméret | 179 × 149 × 39 mm |
Kérdések a termékről
What throughput does the 6.0 Gbps rating deliver when the card is installed in a PCIe x1 slot?
The Marvell 88SE9130 controller provides two 6.0 Gbps SATA ports, so each connected drive can reach the full SATA III line rate while the PCIe x1 link supplies enough bandwidth for both ports simultaneously.
Which M.2 key and specification revision does the slot support?
The slot accepts B-key M.2 modules per the M.2 Specification Revision 0.9, covering lengths of 22 x 30, 22 x 42, 22 x 60, 22 x 80 and 22 x 110 millimetres.
What brackets and mounting hardware come in the box for fitting the card?
A standard-height bracket is pre-installed, a low-profile bracket is included for slim cases, and an M.2 screw set secures the module in the chosen length position.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.00132884BTC
Raktáron
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010113BTC
Raktáron