Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
White PLA filament spool 1.75mm diameter 10m length 34g weight

Unique-Bargains

Unique-Bargains PLA Filament 1.75mm White 10m 34g

SKU CH-8JAZ-6DRBF

10 m of 1.75 mm white PLA filament weighing 34 g with ±0.02 mm accuracy for smooth, bubble-free prints

  • TypeTubes
  • High-purity PLA ensures stable, high-quality prints
  • No bubbles or blistering for smooth, bright finished parts
  • ±0.02 mm dimensional accuracy fits all 1.75 mm printers
  • Low shrinkage and strong toughness resist warping and breakage
  • Eco-friendly material derived from renewable resources

PLA Filament 1.75 mm White 10 m

This PLA filament suits hobbyists and makers who need a short test length of white material. The 10 m spool weighs 34 g and works with any printer that accepts 1.75 mm diameter filament. It is made from renewable resources such as cornstarch and contains no hazardous substances.

Thermals noise and power draw

PLA prints at lower nozzle temperatures than many other thermoplastics, so the printer heater uses less power and runs cooler. The material produces no strong odour during extrusion and the spool adds negligible load to the extruder motor. Dimensional accuracy of ±0.02 mm helps maintain steady flow without extra motor current.

Diameter accuracy ±0.02 mm

The single specification that decides fit is the 1.75 mm diameter with ±0.02 mm tolerance. Printers requiring a different diameter or a tighter tolerance cannot use this spool. Buyers who need a longer continuous length or a different colour must choose another product.

Erősségek

  • High-purity PLA ensures stable, high-quality prints
  • No bubbles or blistering for smooth, bright finished parts
  • ±0.02 mm dimensional accuracy fits all 1.75 mm printers
  • Low shrinkage and strong toughness resist warping and breakage
  • Eco-friendly material derived from renewable resources

Műszaki adatok

BrandUnique Bargains
TypeTubes

Kérdések a termékről

How do I load the 1.75mm PLA filament into my printer without jams?

Pre-heat the nozzle to the PLA temperature, cut the tip at a clean angle, and feed it straight into the extruder until you feel resistance; the common mistake is pushing too fast before the drive gear grips the 1.75mm strand.

When will this 10m, 34g spool need replacing during regular printing?

The 10 metre length yields roughly 34 grams of material, so replacement depends entirely on your model sizes and infill settings; a single large print can consume the entire sample.

What dimensional tolerance causes the first layer issues on long prints?

The filament holds a +/- 0.02mm diameter accuracy, and that tight tolerance is the first limit to show up if the extruder tension or nozzle wear drifts during a lengthy job.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.