我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
White PLA filament spool 1.75mm diameter 10m length 34g weight

Unique-Bargains

Unique-Bargains PLA Filament 1.75mm White 10m 34g

SKU CH-8JAZ-6DRBF

10 m of 1.75 mm white PLA filament weighing 34 g with ±0.02 mm accuracy for smooth, bubble-free prints

  • TypeTubes
  • High-purity PLA ensures stable, high-quality prints
  • No bubbles or blistering for smooth, bright finished parts
  • ±0.02 mm dimensional accuracy fits all 1.75 mm printers
  • Low shrinkage and strong toughness resist warping and breakage
  • Eco-friendly material derived from renewable resources

PLA Filament 1.75 mm White 10 m

This PLA filament suits hobbyists and makers who need a short test length of white material. The 10 m spool weighs 34 g and works with any printer that accepts 1.75 mm diameter filament. It is made from renewable resources such as cornstarch and contains no hazardous substances.

Thermals noise and power draw

PLA prints at lower nozzle temperatures than many other thermoplastics, so the printer heater uses less power and runs cooler. The material produces no strong odour during extrusion and the spool adds negligible load to the extruder motor. Dimensional accuracy of ±0.02 mm helps maintain steady flow without extra motor current.

Diameter accuracy ±0.02 mm

The single specification that decides fit is the 1.75 mm diameter with ±0.02 mm tolerance. Printers requiring a different diameter or a tighter tolerance cannot use this spool. Buyers who need a longer continuous length or a different colour must choose another product.

商品特色

  • High-purity PLA ensures stable, high-quality prints
  • No bubbles or blistering for smooth, bright finished parts
  • ±0.02 mm dimensional accuracy fits all 1.75 mm printers
  • Low shrinkage and strong toughness resist warping and breakage
  • Eco-friendly material derived from renewable resources

商品規格

BrandUnique Bargains
TypeTubes

商品問答

How do I load the 1.75mm PLA filament into my printer without jams?

Pre-heat the nozzle to the PLA temperature, cut the tip at a clean angle, and feed it straight into the extruder until you feel resistance; the common mistake is pushing too fast before the drive gear grips the 1.75mm strand.

When will this 10m, 34g spool need replacing during regular printing?

The 10 metre length yields roughly 34 grams of material, so replacement depends entirely on your model sizes and infill settings; a single large print can consume the entire sample.

What dimensional tolerance causes the first layer issues on long prints?

The filament holds a +/- 0.02mm diameter accuracy, and that tight tolerance is the first limit to show up if the extruder tension or nozzle wear drifts during a lengthy job.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。