XPG GAMMIX S70 Blade 2TB M.2 2280 PCIe 4.0 NVMe 1.4 internal SSD AGAMMIXS70B-2T-CS
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
XPG
4TB M.2 2280 NVMe internal SSD with PCIe Gen4 x4 interface delivering up to 7400 MB/s read and 6600 MB/s write speeds, integrated aluminium heatsink reducing temperatures by up to 20%.
This XPG GAMMIX S70 Blade is a 4TB M.2 2280 NVMe internal SSD built on a PCIe Gen4 x4 interface with an Innogrit IG5236 controller and 3D NAND flash. It targets enthusiasts and gamers who need high-capacity, low-latency storage for large game libraries, content creation workloads, and PlayStation 5 expansion.
An aluminium heatsink is included and can reduce operating temperatures by up to 20 percent under load, keeping the drive within its 0°C to 70°C operating range. The PCIe Gen4 x4 link delivers up to 7400 MBps sequential read and 6600 MBps sequential write while maintaining 750000 IOPS random performance, and the drive is backward compatible with PCIe 3.0 platforms.
The pre-installed heatsink adds 0.640 mm of height so the module fits slim laptops and compact desktops without extra parts. Firmware features include SLC caching, a DRAM cache buffer, end-to-end data protection, and a RAID engine, all compliant with NVMe 1.4 for data integrity and sustained throughput.
| Brand | XPG |
|---|---|
| Series | GAMMIX S70 Blade |
| Model | GAMMIX S70 Blade |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCIe Gen4 x4 |
| Controller | Innogrit IG5236 |
| Max Sequential Read | 7400MBps |
| Max Sequential Write | 6600MBps |
| 4KB Random Read | Up to 750,000 IOPS |
| 4KB Random Write | Up to 750,000 IOPS |
| MTBF | 2000000 |
| HeatSink | with HeatSink |
| Operating Temperature | 0 C ~ +70 C |
| Storage Temperature | -40 C ~ +85 C |
| Max Shock Resistance | 1500G |
| Height | 0.640 |
| Width | 5.000 |
| Depth | 4.000 |
| Weight | 0.0700 |
| Szállítási súly | 0.03 kg |
| Csomagméret | 157 × 102 × 16 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Insert the drive into the M.2 2280 slot at the correct angle, secure it with the motherboard standoff screw, and ensure the aluminum heatsink sits flat without obstructing nearby components.
The drive has no moving parts and requires no scheduled maintenance; its 2 000 000 hour MTBF and 1 500 G shock rating indicate long-term reliability under normal consumer workloads.
The controller throttles when the drive reaches its 70 °C operating ceiling, so adequate case airflow is essential to maintain the 7 400 MB/s read and 6 600 MB/s write peaks.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?