XPG GAMMIX S70 Blade 2TB M.2 2280 PCIe 4.0 NVMe 1.4 internal SSD AGAMMIXS70B-2T-CS
- Internal Solid Stat…
- Consumer
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
XPG
4TB M.2 2280 NVMe internal SSD with PCIe Gen4 x4 interface delivering up to 7400 MB/s read and 6600 MB/s write speeds, integrated aluminium heatsink reducing temperatures by up to 20%.
This XPG GAMMIX S70 Blade is a 4TB M.2 2280 NVMe internal SSD built on a PCIe Gen4 x4 interface with an Innogrit IG5236 controller and 3D NAND flash. It targets enthusiasts and gamers who need high-capacity, low-latency storage for large game libraries, content creation workloads, and PlayStation 5 expansion.
An aluminium heatsink is included and can reduce operating temperatures by up to 20 percent under load, keeping the drive within its 0°C to 70°C operating range. The PCIe Gen4 x4 link delivers up to 7400 MBps sequential read and 6600 MBps sequential write while maintaining 750000 IOPS random performance, and the drive is backward compatible with PCIe 3.0 platforms.
The pre-installed heatsink adds 0.640 mm of height so the module fits slim laptops and compact desktops without extra parts. Firmware features include SLC caching, a DRAM cache buffer, end-to-end data protection, and a RAID engine, all compliant with NVMe 1.4 for data integrity and sustained throughput.
| Brand | XPG |
|---|---|
| Series | GAMMIX S70 Blade |
| Model | GAMMIX S70 Blade |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCIe Gen4 x4 |
| Controller | Innogrit IG5236 |
| Max Sequential Read | 7400MBps |
| Max Sequential Write | 6600MBps |
| 4KB Random Read | Up to 750,000 IOPS |
| 4KB Random Write | Up to 750,000 IOPS |
| MTBF | 2000000 |
| HeatSink | with HeatSink |
| Operating Temperature | 0 C ~ +70 C |
| Storage Temperature | -40 C ~ +85 C |
| Max Shock Resistance | 1500G |
| Height | 0.640 |
| Width | 5.000 |
| Depth | 4.000 |
| Weight | 0.0700 |
| Lähetyspaino | 0.03 kg |
| Pakkauksen mitat | 157 × 102 × 16 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Insert the drive into the M.2 2280 slot at the correct angle, secure it with the motherboard standoff screw, and ensure the aluminum heatsink sits flat without obstructing nearby components.
The drive has no moving parts and requires no scheduled maintenance; its 2 000 000 hour MTBF and 1 500 G shock rating indicate long-term reliability under normal consumer workloads.
The controller throttles when the drive reaches its 70 °C operating ceiling, so adequate case airflow is essential to maintain the 7 400 MB/s read and 6 600 MB/s write peaks.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?