XPG SX6000 Lite ASX6000LNP-512GT-C 512GB internal SSD
- Internal Solid Stat…
- Consumer
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
XPG
M.2 2280 internal SSD with 256 GB capacity, PCIe 3.0 x4 interface, sequential read up to 1800 MBps and write up to 900 MBps
Options 256GB Lite
This XPG SX6000 Lite is a 256GB internal solid state drive in the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface and uses 3D NAND flash with NVMe 1.3 support. The drive is built for consumer desktops, notebooks and ultrabooks that have a compatible M.2 slot. Sequential read reaches up to 1800 MBps and sequential write up to 900 MBps.
Replacing a SATA SSD with this PCIe 3.0 x4 NVMe drive raises sequential read to 1800 MBps and write to 900 MBps. Random read reaches 100,000 IOPS and random write 170,000 IOPS. Endurance is rated at 120TB written and MTBF at 1,800,000 hours. The jump is worthwhile when the system can boot from NVMe and the workload benefits from lower latency and higher throughput.
Verify the motherboard or laptop provides an M.2 2280 slot wired for PCIe 3.0 x4 and that the BIOS or UEFI can boot from an NVMe device. Confirm the operating system includes an NVMe driver or can load one during installation. The drive operates from 0°C to 70°C and draws 0.33W active and 0.14W idle.
| Brand | XPG |
|---|---|
| Series | SX6000 Lite |
| Model | ASX6000LNP-256GT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 1800 MBps |
| Max Sequential Write | Up to 900 MBps |
| 4KB Random Read | Up to 100,000 IOPS |
| 4KB Random Write | Up to 170,000 IOPS |
| Terabytes Written (TBW) | 120TB |
| MTBF | 1,800,000 hours |
| Features | TBW: 120TB NVMe 1.3 support 3D NAND Flash for higher capacity and durability Advanced LDPC ECC Technology HMB (Host Memory Buffer) and SLC Caching Compact M.2 2280 form factor - ideal for high-end desktops, notebooks and Ultrabooks |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G / 0.5 ms |
| Height | 2.15mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8.00g |
| Szállítási súly | 0.03 kg |
| Csomagméret | 132 × 104 × 18 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The drive uses the M.2 2280 form factor, which requires a motherboard slot that accepts 80 mm long modules.
Many builders forget to enable the NVMe 1.3 option in the BIOS before cloning or installing the operating system.
Plan a replacement once the host writes approach 120 terabytes, which the SMART attributes will report as the drive nears its rated endurance.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?