Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 240-pin DDR3 DIMM with black memory chips, gold edge contacts, and silver registration chip

A-Tech

A-Tech 16GB DDR3 1066MHz ECC RDIMM 4Rx4 server RAM

SKU CH-63A4-ZEH0C

16GB DDR3 1066MHz ECC registered server DIMM for Micron-compatible systems

  • Capacity16GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity handles heavy server workloads
  • DDR3 1066MHz speed delivers reliable data throughput
  • ECC RDIMM design detects and corrects memory errors
  • 4Rx4 registered architecture supports high-density configurations
  • 50V standard voltage ensures broad platform compatibility

Server memory upgrade

This 16 GB DDR3 1066 MHz registered ECC module replaces Micron MT72JSZS2G72PZ-1G1D1DF and MT72JSZS2G72PZ-1G1M1 parts in compatible servers and workstations. It delivers 1.5 V operation with CL3 latency and a 4Rx4 organisation for data-integrity workloads.

Replacing older DDR3 ECC RDIMMs

The jump is worthwhile when a system requires registered error-correcting memory at PC3-8500 speed and the existing slots accept 240-pin DIMMs with 4Rx4 density. Buyers who need higher frequencies, lower voltages or unbuffered modules cannot use this product.

Straightforward DIMM installation

Align the 240-pin module with the keyed slot, press evenly until the retention clips engage, then verify the configuration in BIOS. The most common issue is mixing registered and unbuffered DIMMs or exceeding the platform’s rank-per-channel limit, which prevents the system from posting.

Helstu kostir

  • 16GB capacity handles heavy server workloads
  • DDR3 1066MHz speed delivers reliable data throughput
  • ECC RDIMM design detects and corrects memory errors
  • 4Rx4 registered architecture supports high-density configurations
  • 50V standard voltage ensures broad platform compatibility

Tæknilýsing

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT72JSZS2G72PZ-1G1D1DF, MT72JSZS2G72PZ-1G1M1
Capacity16GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMicron Chipset
FeaturesMT72JSZS2G72PZ-1G1D1DF, MT72JSZS2G72PZ-1G1M1

Spurningar um þessa vöru

Will the 240-pin DDR3 DIMM fit my server's registered memory slots?

This module uses the standard 240-pin DDR3 DIMM form factor for registered ECC memory; verify your system requires DDR3 RDIMMs before ordering.

What is the correct way to seat a 4Rx4 registered module so the server recognises the full 16 GB?

Align the notch with the slot key, press firmly until both locking tabs click, then confirm the BIOS shows 16 GB at 1066 MHz with ECC active.

How do I know when a 1.5 V DDR3 ECC RDIMM needs replacement?

Run a memory diagnostic if you see corrected ECC errors in logs, random reboots, or the system reports less than 16 GB at POST.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.