Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 288-pin DDR4 RDIMM with black chips and silver label

A-Tech

A-Tech 16GB DDR4 2400MHz ECC RDIMM 2Rx4 CL17 1.2V Server Memory

SKU CH-96RE-7YERD

16 GB DDR4 2400 MHz ECC registered DIMM with CL17 latency and 1.2 V operation for server upgrades

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 2400 MHz capacity handles heavy server workloads
  • ECC registered design detects and corrects memory errors automatically
  • CL17 latency at 1.2 V delivers responsive performance with standard voltage
  • 2Rx4 dual-rank organisation increases memory density per DIMM slot
  • 288-pin DDR4 DIMM form factor fits compatible server and workstation boards

16GB DDR4 ECC RDIMM for Servers

This 16GB DDR4 2400MHz module is built for server and workstation systems that require error-correcting registered memory. It operates at the standard 1.2V voltage with a CL17 latency and a 2Rx4 rank configuration. The 288-pin DIMM form factor fits compatible DDR4 registered slots.

Direct Replacement for Hynix Part Numbers

The module serves as a compatible equivalent for Hynix HMA42GR7AFR4N-UH, HMA42GR7BJR4N-UH, and HMA42GR7MFR4N-UH part numbers. Using major brand chips, it allows administrators to replace or expand memory in qualified systems without changing existing specifications. Verification of the system's supported memory specifications remains essential before installation.

DDR4 2400 Registered DIMM Constraints

This memory runs at the DDR4 2400 PC4-19200 speed grade and requires a platform that supports registered ECC DIMMs. It will not function in consumer desktop boards that accept only unbuffered non-ECC modules. Mixing with different speeds, ranks, or voltage levels can prevent the system from booting or force all channels to the lowest common denominator.

Helstu kostir

  • 16 GB DDR4 2400 MHz capacity handles heavy server workloads
  • ECC registered design detects and corrects memory errors automatically
  • CL17 latency at 1.2 V delivers responsive performance with standard voltage
  • 2Rx4 dual-rank organisation increases memory density per DIMM slot
  • 288-pin DDR4 DIMM form factor fits compatible server and workstation boards

Tæknilýsing

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

Will the 2Rx4 ECC RDIMM need any firmware updates or chip replacements over its lifetime?

No firmware or chip replacements are required; the module uses major-brand DRAM chips tested to A-Tech quality standards and is backed by a lifetime warranty.

What limits sustained throughput on this DDR4 2400 CL17 1.20V module?

The CL17 latency at 2400 MT/s and the registered buffer set the practical bandwidth ceiling during continuous workloads.

How much heat and power does a 16 GB DDR4 2400 1.2V RDIMM produce running 24/7 in a server?

At the standard 1.2 V DDR4 voltage the module draws minimal power and runs cool enough for dense server chassis without extra cooling.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.