Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 3200MHz ECC Registered RDIMM 2Rx8 Server Memory

SKU CH-AGYV-S3GZY

16 GB DDR4-3200 ECC registered RDIMM with Micron chips, dual-rank 2Rx8 layout and CL22 latency for Supermicro-certified server reliability

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 16 GB DDR4 3200 MHz capacity handles heavy workloads
  • ECC registered design protects data integrity
  • Micron chipset ensures reliable operation
  • CL22 latency at 1.2 V for efficient performance

16GB DDR4 3200MHz ECC Registered RDIMM

This 16GB DDR4 module operates at 3200MHz with CL22 latency and 1.20V standard voltage. It uses a 2Rx8 dual-rank Micron chipset in a 288-pin RDIMM form factor. The module is Supermicro certified as MEM-DR416L-CL06-ER32 and includes ECC registered error correction for data integrity.

Upgrade from non-ECC or lower-capacity DDR4

Replacing non-ECC unbuffered memory adds error correction required by many server platforms. Moving from a single-rank or lower-density DDR4 module increases capacity per slot, which helps when all DIMM slots are populated. The jump is worth it when the motherboard specifies registered ECC DDR4 and the workload demands maximum supported memory density.

Fits 288-pin DDR4 RDIMM server slots

The module installs directly into 288-pin DDR4 RDIMM slots on compatible server motherboards. Registered buffering reduces electrical load on the memory controller, freeing headroom for larger total system memory configurations. ECC functionality requires a platform that supports registered ECC DDR4; systems limited to unbuffered non-ECC memory cannot use this module.

Helstu kostir

  • Supermicro certified for guaranteed server compatibility
  • 16 GB DDR4 3200 MHz capacity handles heavy workloads
  • ECC registered design protects data integrity
  • Micron chipset ensures reliable operation
  • CL22 latency at 1.2 V for efficient performance

Tæknilýsing

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL06-ER32
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL06-ER32 (MTA18ASF2G72PDZ-3G2R1)

Spurningar um þessa vöru

Does the 288-pin RDIMM fit a standard DDR4 server DIMM slot?

Yes, the module uses the 288-pin RDIMM form factor that matches standard DDR4 registered DIMM slots in compatible servers.

How do I install the module, and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify the system recognises the full 16 GB at 3200 MHz in BIOS.

Will the Micron chips or the ECC register need replacement during the server's life?

The module has no user-serviceable parts; the Micron DRAM and on-board register are rated for continuous operation, so no scheduled replacement is required.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.