Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR5 UDIMM modules, no heat spreaders, 288 pins each

A-Tech

A-Tech 192GB (4x48GB) DDR5-5600 ECC UDIMM 2Rx8 Server RAM Kit

SKU CH-KAKY-519Q1

192 GB quad-channel DDR5-5600 ECC UDIMM kit with four 48 GB dual-rank modules at 1.1 V and CL40

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes

Capacity 192GB (4 x 48GB)

  • Massive 192 GB capacity across four 48 GB modules for heavy workloads
  • DDR5-5600 speed at 1.1 V standard voltage for efficient throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • Dual-rank 2Rx8 organisation improves memory density per channel
  • Quad-channel kit delivers full bandwidth on compatible server platforms

192GB DDR5-5600 ECC UDIMM kit

This 192GB kit contains four 48GB DDR5-5600 ECC UDIMM modules built for servers and workstations that require error-correcting unbuffered memory. It is not compatible with desktop or laptop computers.

Unbuffered dual-rank modules without heat spreaders

Each 288-pin DIMM uses Major Brand DRAM IC chips in a 2Rx8 configuration and runs at the standard 1.1V. The unbuffered design connects directly to the memory controller, while the lack of heat spreaders keeps the modules low-profile for dense server chassis.

DDR5-5600 speed with CAS 40 latency

The PC5-44800 rating delivers 5600 MT/s bandwidth at CL40 timing. ECC operation adds parity overhead that slightly reduces usable bandwidth compared to non-ECC modules, and the quad-channel kit requires a platform that supports four simultaneous channels to reach full throughput.

Helstu kostir

  • Massive 192 GB capacity across four 48 GB modules for heavy workloads
  • DDR5-5600 speed at 1.1 V standard voltage for efficient throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • Dual-rank 2Rx8 organisation improves memory density per channel
  • Quad-channel kit delivers full bandwidth on compatible server platforms

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR5 Server Memory RAM
ModelA-Tech 192GB (4x48GB) DDR5-5600 ECC UDIMM Server RAM Kit
Part NumberAT48G4D5D5600UD8EC4N11V
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 SDRAM
SpeedDDR5 5600 (PC5 44800)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Aðrar útgáfur af þessari vöru

3 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What bandwidth does the PC5-44800 DDR5 interface deliver?

The kit runs at DDR5 5600 (PC5-44800), providing up to 44800 MT/s per module for server and workstation workloads.

Will these 288-pin ECC UDIMM modules fit my server board?

Each 48 GB module uses the standard 288-pin DDR5 DIMM form factor and requires a DDR5 server or workstation motherboard that supports ECC unbuffered memory.

How do I install the quad-channel kit correctly?

Populate all four slots in the motherboard's recommended channel order — usually slot 1 of each channel first — and verify the BIOS detects 192 GB at 5600 MT/s.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.