NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
A 32 GB DDR4 2666 ECC UDIMM module with CL19 timing and 1.20 V operation for server workloads
This A-Tech module delivers 32GB of DDR4 2666 (PC4-21300) ECC unbuffered memory in a single 288-pin DIMM. It operates at the standard 1.20V with CL19 latency and uses a 2Rx8 rank configuration built with major brand chips. The part is a compatible equivalent for the Samsung M391A4G43MB1-CTD module.
This module fits systems that accept DDR4 2666 ECC unbuffered DIMMs and have a free 288-pin slot. It is not for platforms that require registered or load-reduced memory, nor for boards limited to non-ECC or lower-density modules. Buyers needing higher speeds, different voltages or registered DIMMs should look elsewhere.
The 32GB density on one stick determines whether your board and CPU memory controller support this rank and capacity per slot. Verify the maximum supported density per DIMM and the qualified vendor list for your specific server or workstation model before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at CL19 with a 2666 MHz data rate, so latency is fixed at that specification for continuous operation.
Standard DDR4 1.20 V voltage keeps power draw low, and the unbuffered design has no active cooling to generate noise.
A DDR4 UDIMM slot with ECC support is needed; the 288-pin form factor and 2Rx8 organisation must be accepted by the platform.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?