Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

A-Tech

A-Tech 4GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx8 Micron MT36JSZF51272PDZ-1GF1D Server Memory

SKU CH-VKGS-MQRFP

4GB DDR3 1066MHz ECC registered DIMM with Micron chips for server upgrades

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity adds headroom for virtualization workloads
  • DDR3 1066 MHz PC3-8500 speed matches legacy server specs
  • ECC registered design corrects errors in mission-critical systems
  • 240-pin DIMM form factor fits standard DDR3 slots
  • 50V operation aligns with DDR3 voltage standard

Server Memory Upgrade

This A-Tech 4GB DDR3 module runs at 1066MHz with PC3-8500 bandwidth and CL7 latency. It is a registered ECC DIMM built for server and workstation platforms that require error correction and signal buffering. The 240-pin form factor operates at standard 1.5V DDR3 voltage.

Compatibility Profile

Suits administrators expanding capacity in systems validated for DDR3 registered ECC memory with 4Rx8 organisation. Not suited for desktop boards that accept only unbuffered non-ECC modules or for platforms limited to lower-rank configurations. Verify your system's qualified vendor list before ordering.

What the Bundle Changes

The package contains a single qualified memory module tested to Micron MT36JSZF51272PDZ-1GF1D equivalence. No cables, brackets or software are included; the upgrade effect comes entirely from adding registered ECC capacity to a compatible motherboard.

Helstu kostir

  • 4GB capacity adds headroom for virtualization workloads
  • DDR3 1066 MHz PC3-8500 speed matches legacy server specs
  • ECC registered design corrects errors in mission-critical systems
  • 240-pin DIMM form factor fits standard DDR3 slots
  • 50V operation aligns with DDR3 voltage standard

Tæknilýsing

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

My server only has DDR3 slots — will this 240-pin ECC RDIMM fit and run at 1066 MHz?

Yes, the module is a 240-pin DDR3 DIMM rated for 1066 MHz PC3-8500, so it installs directly into any DDR3 server slot that accepts registered ECC memory.

Can I mix this 4Rx8 registered stick with the older 2Rx4 unbuffered modules already in my system?

No, registered and unbuffered DIMMs cannot be used together; the memory controller will not initialise a mixed configuration.

After installing the module, how can I confirm it is running at the rated 1066 MHz with ECC active?

Check the BIOS memory information or run a tool such as CPU-Z; it should report 1066 MHz, CL7 timings, 1.50 V and ECC enabled.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.