Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green PCB DDR3 server memory module with black DRAM chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1333 ECC RDIMM 2Rx4 Server RAM

SKU CH-TFQA-T7SJT

4GB DDR3 1333 ECC registered DIMM with CL9 latency and 1.5V operation for server upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with built-in error correction
  • Registered design stabilises signal timing for multi-module server configs
  • 1333 MHz DDR3 speed delivers 10600 MB/s bandwidth for responsive workloads
  • 2Rx4 dual-rank layout increases memory density per DIMM slot
  • 5 V standard voltage ensures broad platform compatibility

4GB DDR3 ECC RDIMM Server Memory

This 4GB DDR3 module operates at 1333 MHz with CL9 latency and 1.5V standard voltage. It uses a registered DIMM design with 2Rx4 organisation and Micron chipset for error-correcting server workloads. The 240-pin form factor fits compatible DDR3 server platforms.

Suits servers needing registered ECC DDR3 at 1333

This module matches systems qualified for Micron MT36JDZS51272PZ-1G4F1AD and related part numbers. It is not for desktop boards that require unbuffered non-ECC memory. Buyers whose platforms demand a different voltage, speed, or rank configuration cannot use this product.

Registered ECC with 2Rx4 organisation decides fit

The 2Rx4 registered ECC layout is the single specification that determines whether a DDR3 server board will accept this module. Verify the motherboard documentation for registered DIMM support and this exact rank structure before purchase.

Helstu kostir

  • ECC protection guards data integrity with built-in error correction
  • Registered design stabilises signal timing for multi-module server configs
  • 1333 MHz DDR3 speed delivers 10600 MB/s bandwidth for responsive workloads
  • 2Rx4 dual-rank layout increases memory density per DIMM slot
  • 5 V standard voltage ensures broad platform compatibility

Tæknilýsing

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36JDZS51272PZ-1G4F1AD, MT36JDZS51272PZ-1G4F1DD, MT36JSZF51272PY-1G4D1, MT36JSZF51272PZ-1G4F1AB, MT36JSZF51272PZ-1G4F1DD
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36JDZS51272PZ-1G4F1AD, MT36JDZS51272PZ-1G4F1DD, MT36JSZF51272PY-1G4D1, MT36JSZF51272PZ-1G4F1AB, MT36JSZF51272PZ-1G4F1DD

Spurningar um þessa vöru

How much power does this 1.50 V DDR3 1333 module draw when the server runs continuously?

The module operates at the standard DDR3 voltage of 1.50 V; registered ECC DIMMs at this speed typically draw a few watts per stick under sustained load, so total power scales with the number of modules installed.

What must the motherboard provide for this 240-pin registered ECC DIMM to function?

The board needs DDR3 DIMM slots wired for registered (buffered) memory with ECC support and a memory controller that accepts 2Rx4 organisation at PC3-10600 speed.

Can this PC3-10600 registered ECC stick share a channel with older unbuffered non-ECC DDR3 DIMMs?

No — registered and unbuffered DIMMs cannot be mixed on the same channel, and ECC must be enabled across all populated slots for the module to operate correctly.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.